Swivl

How Much Does Concrete Contracting Cost in ?

$3.83 – $5.65 per sq ft

Most homeowners in Americus, GA can expect to pay around $3.83 to $5.65 per square foot for concrete contracting services. Project size and repairs needed are key factors influencing the overall cost.

Concrete contracting cost by tier

What most Americus homeowners pay at each tier.

Basic

$3 – $3.83per sq ft

Resurfacing existing concrete driveways with basic repairs.

Mid-range

$3.83 – $5.65per sq ft

Concrete floor polishing or standard concrete foundation installation.

Premium

$5.65 – $10per sq ft

More complex concrete projects or extensive resurfacing with significant repairs.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what concrete contracting typically costs in Americus, GA. The page shows a range of $3–$10 per sq ft, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

When planning a concrete project in Americus, GA, understanding the potential costs involved is crucial for homeowners. Whether you're considering a new driveway, a polished concrete floor, or a solid foundation, prices can vary significantly. Most homeowners in Americus can expect to pay $3.83–$5.65 per square foot for concrete contracting services. This range covers a variety of common projects and contractor skill levels.

However, the total cost for concrete work in Americus can span a broader spectrum, from as low as $3 per square foot for basic resurfacing to as much as $10 per square foot for more complex or extensive projects. This guide will break down the factors influencing concrete costs, help you compare quotes effectively, and provide valuable insights into hiring the right contractor for your specific needs.

Cost Comparison

TierPrice RangeWhat's Included
Basic$3–$3.83 per sq ftResurfacing existing concrete driveways with basic repairs.
Mid-range$3.83–$5.65 per sq ftConcrete floor polishing or standard concrete foundation installation.
Premium$5.65–$10 per sq ftMore complex concrete projects or extensive resurfacing with significant repairs.

Labor Costs

ServiceAverage Cost (per square foot)
Basic Concrete WorkVaries highly
Concrete Floor Polishing$3.83
Concrete Foundation (4-inch reinforced slab)$5.65
Resurfacing Existing Driveways$3-$10

Key Cost Factors

  • Project Size and Scope: Larger projects often benefit from economies of scale, while intricate designs or small, specialized jobs can increase the per-square-foot cost. Significant repairs, like those sometimes needed during resurfacing, also add to the overall expense.
  • Type of Concrete and PSI: The strength (PSI) of the concrete significantly affects its material cost. Higher PSI concrete, such as 4000 PSI, costs more than lower PSI options like 2500 PSI.
  • Reinforcement: Projects requiring steel reinforcement, such as a 4-inch reinforced slab on grade, will incur higher material and labor costs compared to unreinforced concrete.
  • Site Preparation: The amount of work needed to prepare the site, including excavation, grading, and debris removal, can add to the total cost. Difficult access to the project area can also increase labor and equipment expenses.
  • Finishing and Aesthetics: Decorative concrete finishes, such as stamping, staining, or extensive polishing (like concrete floor polishing which averages $3.83 per square foot), will increase the price compared to a standard broom finish.
  • Repairs and Existing Conditions: For projects like resurfacing existing driveways, the extent of necessary repairs can drive costs up, potentially pushing the project into the premium price range.

Regional Pricing

LocationAverage Concrete Cost (per square foot)
Americus, GA$3.83–$5.65
Georgia (State Average for Foundation)$5.35 - $5.95
National Average (Resurfacing)$3-$10

Tips for Hiring

  1. Get Multiple Quotes: Reach out to several local concrete contractors in Americus. Companies like Americus Concrete Construction, with over 10 years of experience, or contractors found on platforms like Thumbtack, can provide detailed estimates. Comparing quotes ensures you get a competitive price and a clear understanding of what's included.
  2. Check Credentials and References: Always verify that the contractor is fully licensed and certified. Ask for references from previous clients and look for reviews on platforms like Yelp or Facebook groups to gauge their reliability and quality of work. Groundworks, for example, is BBB A+ rated for concrete lifting services.
  3. Understand the Contract: Before signing, ensure the contract explicitly outlines all project details, including materials, labor, timelines, payment schedules, warranties, and any potential additional costs. A clear contract helps prevent misunderstandings later on.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 1 concrete contracting pros in Americus, GA.

1 of 1 verified pros

See all 1 pros

Find Concrete Contracting Contractors in Americus, GA

Get free quotes from top-rated local contractors

FAQs

Common questions about concrete contracting costs in Americus, GA.

The cost of concrete per yard in Americus, Georgia, generally ranges from $126 to $152, depending on the PSI (pounds per square inch) of the concrete. For instance, 2500 PSI concrete might cost around $160 per yard, while 3000 PSI is approximately $164, and 4000 PSI is often higher.

Several factors influence the price per square foot, including the type of project (e.g., resurfacing, polishing, foundation), the complexity of the job, the amount of site preparation needed, the chosen finish, and the extent of any necessary repairs to existing concrete structures.

While specific data for a 20x20 slab in Americus is not available, using the typical range of $3.83–$5.65 per square foot, a 400 square foot (20x20) slab could potentially cost between $1,532 and $2,260 for basic to mid-range projects. This excludes more complex installations or significant repairs.

An installed 40x60 concrete slab that is 4 inches thick will typically cost between $9,600 and $19,200. This is based on a general cost of $4 to $8 per square foot for materials and labor for a 4-inch slab, depending on the location and specific project requirements.

Many concrete contractors, such as Groundworks for concrete lifting services, offer free inspections. It is common practice for concrete contractors to provide free estimates or quotes for projects, allowing homeowners to compare prices before committing.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide