Swivl

How Much Does Concrete Contracting Cost in ?

$6 – $11 per sq ft

In Loganville, GA, homeowners can expect to pay between $6 and $11 per square foot for concrete contracting. Key factors influencing these costs include the project's size, required site preparation, and the type of concrete mix used.

Concrete contracting cost by tier

What most Loganville homeowners pay at each tier.

Basic

$5 – $6.50per sq ft

Basic concrete services for smaller projects with standard concrete mixes and minimal site preparation.

Mid-range

$6.50 – $10.50per sq ft

Standard concrete slab pouring, likely for driveways or patios, with common concrete mixes and typical site conditions.

Premium

$10.50 – $14per sq ft

More complex concrete projects or those requiring special concrete mixes, extensive site preparation, or specific finishes like stamped concrete.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what concrete contracting typically costs in Loganville, GA. The page shows a range of $5–$14 per sq ft, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

When planning a concrete project for your home in Loganville, GA, understanding the potential costs involved is crucial for effective budgeting and comparing quotes. Most homeowners in Loganville can expect to pay $6 to $11 per square foot for concrete contracting services. This range covers a wide variety of common projects, from simple patio pours to new driveways, reflecting the typical expenses for materials, labor, and basic site preparation in the area.

While the typical cost falls within this comfortable range, the full spectrum of concrete contracting prices in Loganville can vary more broadly, from $5 to $14 per square foot. This wider range accounts for highly specialized projects, those requiring extensive site work, or premium finishes that naturally command higher prices. By understanding both the typical and full envelope pricing, you'll be better equipped to evaluate the bids you receive and make informed decisions for your concrete project.

Cost Comparison

TierPrice Range per Sq FtWhat's Included
Basic$5–$6.5Basic concrete services for smaller projects with standard concrete mixes and minimal site preparation.
Mid-range$6.5–$10.5Standard concrete slab pouring, likely for driveways or patios, with common concrete mixes and typical site conditions.
Premium$10.5–$14More complex concrete projects or those requiring special concrete mixes, extensive site preparation, or specific finishes like stamped concrete.

Labor Costs

ServiceTypical Cost
Concrete Slab Pouring$6.50 - $10.50 per square foot
Concrete RepairVaries by project complexity (often included in overall square footage costs)
Concrete Finishing (e.g., stamping)Can increase total project cost to the premium tier ($10.50 - $14 per square foot)
Site PreparationVariable, depending on existing conditions

Key Cost Factors

  • Job Size and Complexity: Larger or more intricate projects, like a custom-shaped patio or a sloped driveway, will generally incur higher per-square-foot costs due to increased labor and material requirements.
  • Site Preparation: The amount of work needed to prepare the site, such as excavation, grading, or removal of old concrete, significantly impacts the overall cost. Projects requiring extensive earthwork will be more expensive.
  • Type of Concrete Mix and Finish: Standard concrete mixes are more affordable. However, specialized mixes (e.g., high-strength, fast-drying) or decorative finishes like stamped concrete or colored concrete, which fall into the premium tier, will increase the price per square foot.
  • Accessibility: If the project site is difficult to access with heavy equipment, such as a backyard with a narrow gate, contractors may need to use more labor-intensive methods, leading to higher costs.
  • Base Material: The quality and quantity of the sub-base material (e.g., gravel) required under the concrete slab to ensure proper drainage and stability can influence the project's total expense.

Regional Pricing

LocationTypical Concrete Contracting Cost per Sq Ft
Loganville, GA$6 - $11
Locust Grove, GA$5 - $11
Smyrna, GAComparable to Loganville, often within the $6 - $14 range

Tips for Hiring

  1. Get Multiple Quotes: Always solicit at least three detailed quotes from different concrete contractors in Loganville. This allows you to compare pricing, services included, and contractor reliability.

  2. Verify Credentials: Ensure the concrete contractor is licensed and insured. This protects you in case of accidents or issues during the project. Angi lists local concrete repair specialists in Loganville, GA, and many contractors are highly rated.

  3. Check References and Reviews: Look for contractors with strong ratings and positive reviews, such as "4.9☆ rated concrete contractor serving Loganville, GA" mentioned by some local businesses. Verify their experience with projects similar to yours.

  4. Understand the Contract: Before signing, thoroughly review the contract to ensure all aspects of the project, including materials, labor, timelines, and payment schedules, are clearly outlined. Ask for clarification on anything you don't understand.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 4 concrete contracting pros in Loganville, GA.

4 of 4 verified pros

See all 4 pros

Find Concrete Contracting Contractors in Loganville, GA

Get free quotes from top-rated local contractors

FAQs

Common questions about concrete contracting costs in Loganville, GA.

Most homeowners in Loganville, GA, can expect to pay between $6 and $11 per square foot for concrete contracting services. The overall range can be from $5 to $14 per square foot depending on the project's complexity and specific requirements.

Basic concrete services, usually for smaller projects with standard concrete mixes and minimal site preparation, typically cost between $5 and $6.50 per square foot.

Key factors influencing the cost include job size, the amount of site preparation needed, the specific type of concrete mix, whether special finishes like stamped concrete are desired, and the accessibility of the project site. These can push costs into the mid-range ($6.50-$10.50 per square foot) or premium tier ($10.50-$14 per square foot).

Yes, it is highly recommended to get at least three detailed quotes from different concrete contractors in Loganville. This will help you compare pricing, understand what's included in each bid, and choose the best value for your project.

Additional costs can arise from extensive site preparation, specialized concrete mixes (e.g., high-strength), decorative finishes like stamping or coloring, and potential underordering of concrete. For example, underordering concrete can lead to significant additional costs per yard, as some providers charge around $203 per yard for additional concrete.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide