Swivl

How Much Does Concrete Sealing Services Cost in ?

$3 – $10 per sq ft

Concrete sealing services in Marietta, GA typically range from $3 to $10 per square foot. The main factors influencing the cost are the size of the area to be sealed and the type of sealant used.

Concrete sealing services cost by tier

What most Marietta homeowners pay at each tier.

Basic

$0.40 – $0.90per sq ft

Basic concrete sealing for general protection (DIY cost is lower than hiring a professional).

Mid-range

$3 – $6.50per sq ft

Professional concrete sealing services for typical residential areas.

Premium

$6.50 – $10per sq ft

Advanced concrete sealing with specialized materials or for larger, more complex areas.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what concrete sealing services typically costs in Marietta, GA. The page shows a range of $0–$10 per sq ft, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

Protecting your concrete surfaces is a smart investment, and understanding the costs involved in Marietta, GA, is the first step toward making an informed decision. For most homeowners, the typical cost for concrete sealing services in Marietta falls between $3 and $10 per square foot. This range covers a wide variety of projects, from driveways to patios and walkways. While the typical cost provides a good benchmark, the full envelope of pricing, encompassing everything from basic DIY-level sealing to specialized professional applications, can range from $0.40 to $10 per square foot.

Concrete sealing is crucial for extending the lifespan of your concrete, protecting it from weathering, stains, and cracking. Factors such as the size and type of the area being sealed, the quality of the sealant used, and whether you opt for professional service or a DIY approach will significantly influence the final price. This guide will break down the costs, help you understand what you're paying for, and provide valuable tips for hiring the right service provider in Marietta, GA.

Cost Comparison

TierPrice Range (per sq ft)What's Included
Basic$0.40–$0.90Basic concrete sealing for general protection (DIY cost is lower than hiring a professional).
Mid-range$3–$6.50Professional concrete sealing services for typical residential areas.
Premium$6.50–$10Advanced concrete sealing with specialized materials or for larger, more complex areas.

Labor Costs

ServiceTypical Cost
Professional Concrete Sealing (per sq ft)$3–$10
Minor Sealing Projects (basement floors/walls)$250–$600
Driveway Sealing (average total cost)$670 (typically $350–$870)
DIY Sealing (materials for 50 sq ft)$20–$40
Powerwashing and Sealing (DIY for 4-5 hours of work)Around $500 (materials like roller and Xylene)

Key Cost Factors

  • Size of the Area: Larger areas naturally require more materials and labor, increasing the total cost. The overall cost is primarily driven by the size of the area to be sealed.
  • Type of Concrete and Surface Condition: The condition of your concrete and its type (e.g., standard, stamped, aggregate) can impact preparation time and sealant choice.
  • Type of Sealant Used: Different sealants offer varying levels of protection and durability, impacting the price. Specialized materials can drive costs into the premium range.
  • Labor and Professional Fees: Hiring a professional service incurs labor costs, but ensures proper application and often includes surface preparation. This will typically range from $3 to $10 per square foot.
  • Geographic Location: While this guide focuses on Marietta, regional pricing differences can exist. For instance, Atlanta, GA, concrete sealing services typically cost between $3 and $10 per square foot, aligning closely with Marietta.
  • Scope of Work: Additional services like extensive cleaning, crack repair, or multiple coats of sealant will add to the overall cost. Smaller repairs for minor sealing projects on basement floors or walls range from $250 to $600.

Regional Pricing

LocationConcrete Sealing Cost (per sq ft)
Marietta, GA$3–$10
Atlanta, GA$3–$10

Tips for Hiring

  1. Get Multiple Quotes: Contact several local professionals in Marietta, GA, to compare pricing and services. This helps ensure you get a competitive rate tailored to your specific project.
  2. Check for Experience and References: Look for contractors with a solid reputation and positive reviews. HomeAdvisor can be a good resource for finding top-rated concrete service experts in Marietta, GA.
  3. Understand What's Included: Ensure your quote clearly outlines all services, including surface preparation, the type of sealant used, and the number of coats. Some contractors may charge additional for sealing beyond the initial service.
  4. Inquire About Warranties: A reputable contractor should offer a warranty on their work and the sealant used, providing peace of mind.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 2 concrete sealing services pros in Marietta, GA.

TL
Tight Line ExteriorsMarietta, GA
SC
Southeastern Commercial RestorationsMarietta, GA

2 of 2 verified pros

See all 2 pros

Are you a contractor? See job pricing for concrete sealing services in Marietta, GA

Find Concrete Sealing Services Contractors in Marietta, GA

Get free quotes from top-rated local contractors

View More

Concrete Sealing Services costs in cities near Marietta

Prices in nearby GA cities. Looking for another? Switch cities from the heading above.

Atlanta, GA$0.40 – $1 /sq ftStockbridge, GA$0.40 – $10 /sq ftLoganville, GA$0.40 – $3 /sq ftSuwanee, GA$0.40 – $3 /sq ftDalton, GA$0.40 – $2.50 /sq ftJuliette, GALithia Springs, GA$0.40 – $2.50 /sq ftToccoa, GA$0.40 – $10 /sq ft

FAQs

Common questions about concrete sealing services costs in Marietta, GA.

To estimate the amount of concrete sealer needed, you'll first need to measure the total square footage of the area you intend to seal. Most sealant products specify coverage rates per square foot on their packaging. Multiply your total square footage by the recommended coverage rate to determine how much product to purchase. It's often wise to buy a little extra to account for any spills or to ensure even application.

Sealing concrete yourself can be more cost-effective for smaller, basic projects, with materials for 50 square feet costing around $20 to $40. A DIY approach to powerwashing and sealing might cost around $500 for a medium-sized area, including materials. However, hiring a professional ensures proper surface preparation and application, which is crucial for the sealant's effectiveness and longevity, especially for larger or more complex areas and where specialized materials are required. Professionals typically charge $3–$10 per square foot.

Several factors influence the lifespan of concrete sealant, including the type of sealant applied (e.g., penetrating vs. topical), the quality of surface preparation, the amount of traffic and exposure to elements the concrete receives, and proper maintenance. High-quality sealants applied correctly to a well-prepared surface in moderate traffic areas will generally last longer.

Concrete sealing is important in Marietta, GA, to protect concrete surfaces from the local climate, which can include varying temperatures, humidity, and rainfall. Sealing helps prevent water penetration, which can lead to freeze-thaw damage, cracking, and surface erosion. It also protects against oil stains, tire marks, and UV damage, extending the life and maintaining the aesthetic appeal of driveways, patios, and walkways.

The average driveway sealing cost in Marietta, GA, is around $670, with a typical range between $350 and $870. This price can vary depending on the driveway's size, the type of sealant used, and specific labor costs. If charged by the square foot, this would typically fall within the $3–$10 per square foot range for professional services.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide