Swivl

How Much Does Drywall & Acoustical Cost in ?

$1.50 – $3 per sq ft

Homeowners in Hiram, GA, typically pay between $1.50 and $3 per square foot for drywall and acoustical services, including materials, labor, and finishing. The wide range in cost is mainly driven by the complexity of the installation and the type of finish desired.

Drywall & acoustical cost by tier

What most Hiram homeowners pay at each tier.

Basic

$1.50 – $3per sq ft

Basic drywall installation and finishing, covering materials, labor, and taping.

Mid-range

$3 – $9per sq ft

Drywall and acoustical installation with standard finishes.

Premium

$9 – $13per sq ft

Advanced drywall and acoustical installations, potentially including specialized finishes or complex layouts.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what drywall & acoustical typically costs in Hiram, GA. The page shows a range of $2–$13 per sq ft, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

Drywall and acoustical installations are fundamental to the look, feel, and sound quality of your home. Whether you're finishing a new construction, renovating an old space, or simply needing repairs, understanding the costs involved is crucial for Hiram, GA homeowners. Most homeowners in Hiram can expect to pay $1.50 to $3 per square foot for basic drywall installation and finishing. This typical range covers materials, labor, and the essential taping needed to achieve a smooth surface.

However, the total cost can vary significantly depending on the complexity of the project, ranging anywhere from $1.50 to $13 per square foot for a full envelope of services. Factors such as the type of drywall, specialized acoustical treatments, the intricacy of the design, and the accessibility of the project area all play a role in determining the final price. This guide will help you compare quotes and make informed decisions for your drywall and acoustical needs in Hiram, GA.

Cost Comparison

TierPrice RangeWhat's Included
Basic$1.50–$3 per sq ftBasic drywall installation and finishing, covering materials, labor, and taping.
Mid-range$3–$9 per sq ftDrywall and acoustical installation with standard finishes.
Premium$9–$13 per sq ftAdvanced drywall and acoustical installations, potentially including specialized finishes or complex layouts.

Labor Costs

ServiceDescriptionAverage Cost Factor
InstallationHanging and securing drywall sheets. Labor is a significant component of the $1.50 to $3 per square foot typical cost for basic installation.High
Taping and FinishingApplying joint compound, taping seams, and sanding for a smooth finish. This is included in the basic per-square-foot cost.Medium
Acoustical TreatmentInstallation of sound-absorbing materials or specialized acoustical panels. This typically falls into the mid-range to premium tiers.High
Specialty FeaturesComplex cuts, archways, niches, or custom designs requiring more skilled labor and time.Very High
Repair WorkPatching holes, repairing cracks, or addressing water damage. Costs depend on the extent and complexity of the repair.Varies

Key Cost Factors

  • Type of Drywall: Standard drywall is the most affordable, but specialized options like moisture-resistant, fire-resistant, or soundproof drywall will increase material costs.
  • Project Complexity: Simple, flat surfaces are cheaper than jobs involving numerous corners, arches, high ceilings, or intricate architectural details.
  • Acoustical Requirements: Incorporating soundproofing materials or acoustic ceiling tiles will elevate the overall cost, typically pushing projects into the mid-range or premium categories.
  • Prep Work and Demolition: If old drywall needs to be removed, or if extensive surface preparation is required, these additional labor steps will add to the final bill.
  • Finishing Level: The desired level of finish (e.g., smooth vs. textured, paint-ready vs. requiring further aesthetic treatments) directly impacts the labor and material costs for mudding, sanding, and priming.
  • Accessibility: Projects in hard-to-reach areas, confined spaces, or requiring specialized equipment (like scaffolding for very high ceilings) can incur higher labor costs.

Regional Pricing

LocationAverage Drywall Cost (per sq ft)Notes
Hiram, GA$1.50–$3Typical range for basic drywall installation and finishing.
Acworth, GA$1.50–$3Similar pricing to Hiram for basic installation and finishing.
Georgia (State Average)$1.50–$3.50The state average aligns closely with local Hiram and Acworth costs.
National AverageGenerally higherCosts outside Georgia can be significantly higher than local averages.

Tips for Hiring

  1. Get Multiple Quotes: Always compare at least three detailed quotes from different contractors. This helps you understand the range of services and pricing available in Hiram.
  2. Check References and Reviews: Look for contractors with strong local reputations on platforms like Angi or Yelp in Hiram, GA. Review past customer feedback to gauge reliability and quality of work.
  3. Verify Licensing and Insurance: Ensure the drywall professional is properly licensed and insured. This protects you from liability in case of accidents or damage during the project.
  4. Confirm What's Included: Clarify that quotes include all materials, labor, cleanup, and finishing details (like taping and sanding) to avoid hidden costs. Ask about warranties on their work.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 2 drywall & acoustical pros in Hiram, GA.

2 of 2 verified pros

See all 2 pros

Find Drywall & Acoustical Contractors in Hiram, GA

Get free quotes from top-rated local contractors

FAQs

Common questions about drywall & acoustical costs in Hiram, GA.

Most homeowners in Hiram, GA, can expect to pay between $1.50 and $3 per square foot for basic drywall installation and finishing. This includes materials, labor, and the necessary taping to achieve a smooth surface.

Projects can exceed $3 per square foot for several reasons, such as requiring specialized drywall (e.g., moisture-resistant, soundproof), incorporating acoustical treatments, complex layouts with many corners or curves, or demanding a higher level of finish. Advanced installations can range from $9 to $13 per square foot.

Typically, the cost estimates for drywall installation, especially in the basic to mid-range tiers, do not include painting. These prices usually cover the installation, taping, and finishing (mudding and sanding) to a paint-ready state. Painting would be an additional service.

To reduce costs, consider opting for standard drywall types, minimizing complex architectural features, and discussing a basic finish level with your contractor. Some homeowners also choose to do the final sanding and priming themselves, though a professional finish is often recommended.

The duration of a drywall project depends heavily on the size and complexity of the area. A small room might take a few days for installation, taping, and finishing, while a whole house or a complex renovation could take several weeks. Your contractor should provide a timeline with their quote.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide