Swivl

How Much Does Drywall Installation Cost in ?

$1.50 – $3.50 per sq ft

Most homeowners in Fayetteville, GA can expect to pay around $1.50 to $3.50 per square foot for drywall installation, including both materials and labor. The total cost is primarily driven by the size of the area to be drywalled and the complexity of the installation.

Drywall installation cost by tier

What most Fayetteville homeowners pay at each tier.

Basic

$0.60 – $1.10per sq ft

Basic hanging only of drywall in a straightforward space.

Mid-range

$1.50 – $2.50per sq ft

Installation including both materials and labor for standard drywall projects.

Premium

$2.50 – $3.50per sq ft

Comprehensive installation services for more complex areas or specialized drywall types.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what drywall installation typically costs in Fayetteville, GA. The page shows a range of $1–$4 per sq ft, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

Understanding the cost of drywall installation is crucial for homeowners in Fayetteville, GA, whether you're undertaking a new construction project, a renovation, or just need repairs. Drywall is an essential component of most homes, providing durability, insulation, and a smooth surface for painting. While prices can vary significantly based on the scope and complexity of the work, most Fayetteville homeowners can expect to pay $1.50 to $3.50 per square foot for drywall installation, including both materials and labor.

This guide will help you navigate the various costs associated with drywall installation, allowing you to make informed decisions and compare quotes effectively. While the typical range covers the majority of projects, the full envelope of costs can span from $0.60 to $3.50 per square foot, encompassing everything from basic hanging to comprehensive, specialized installations. By breaking down costs into different tiers and detailing key factors, you'll gain a clearer picture of what to expect for your specific drywall needs.

Cost Comparison

TierPrice RangeWhat's Included
Basic$0.60–$1.10 per sq ftBasic hanging only of drywall in a straightforward space.
Mid-range$1.50–$2.50 per sq ftInstallation including both materials and labor for standard drywall projects.
Premium$2.50–$3.50 per sq ftComprehensive installation services for more complex areas or specialized drywall types.

Labor Costs

Scope of WorkAverage Labor Cost
Hanging Only$0.60–$1.10 per sq ft
Finishing Only$1.10–$2.50 per sq ft
Hanging + FinishingVaries by project complexity (typically included in overall per sq ft cost)
Per Hour (plus material)$50–$100 per hour

Key Cost Factors

  • Project Size and Complexity: Larger projects generally have a lower per-square-foot cost due to economies of scale. Complex layouts with many corners, angles, or cut-outs will increase labor time and thus costs.
  • Type of Drywall: Standard drywall is the most common and affordable. However, specialized types like mold-resistant, fire-resistant, or soundproof drywall are more expensive.
  • Material Costs: The cost of drywall sheets themselves can vary, ranging from $30 to $160 per sheet depending on size and type. These material costs are often factored into the overall per-square-foot estimate for mid-range and premium services.
  • Finish Level: The desired finish level (e.g., smooth finish for painting vs. textured) impacts the amount of labor and materials required for taping, mudding, and sanding.
  • Local Labor Rates: Labor rates in Fayetteville, GA, can vary among contractors. Factors like a contractor's experience, reputation, and demand influence their hourly or per-square-foot charges.
  • Accessibility: Areas that are difficult to access, such as high ceilings or cramped spaces, can increase labor time and overall project costs.

Regional Pricing

LocationAverage Drywall Installation Cost
Fayetteville, GA (Typical)$1.50–$3.50 per sq ft
Georgia (General)$1.50 per sq ft (Range: $1.45–$1.55)
Fayetteville, GA (Drywall Repair)$244 (Range: $244–$244)

Tips for Hiring

  1. Obtain Multiple Quotes: Always get estimates from at least three different drywall contractors to compare pricing and ensure you're getting a fair rate for your project in Fayetteville, GA.
  2. Check References and Reviews: Look for contractors with positive reviews and strong references on platforms like Yelp to ensure their reliability and quality of work.
  3. Verify Licensing and Insurance: Confirm that the contractor is properly licensed and insured. This protects you in case of accidents or damage during the project.
  4. Get a Detailed Contract: Ensure your contract clearly outlines the scope of work, materials to be used, project timeline, payment schedule, and any warranties or guarantees.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 1 drywall installation pros in Fayetteville, GA.

1 of 1 verified pros

See all 1 pros

Find Drywall Installation Contractors in Fayetteville, GA

Get free quotes from top-rated local contractors

FAQs

Common questions about drywall installation costs in Fayetteville, GA.

Most homeowners in Fayetteville, GA, can expect to pay between $1.50 and $3.50 per square foot for drywall installation, which generally includes both materials and labor.

For mid-range and premium services (typically $1.50 to $3.50 per square foot), the price usually includes both the cost of materials and the labor for installation. Basic hanging-only services might separate these costs.

Basic hanging only of drywall in a straightforward space typically costs $0.60 to $1.10 per square foot for labor. This does not include finishing or materials.

Key factors that can increase costs include complex project layouts with many angles, the use of specialized drywall types (e.g., fire-resistant, soundproof), higher finish levels, and difficult-to-access areas like high ceilings.

Yes, services typically range from a basic tier ($0.60–$1.10 per sq ft) for hanging only, to a mid-range tier ($1.50–$2.50 per sq ft) for standard installation with materials and labor, up to a premium tier ($2.50–$3.50 per sq ft) for complex projects or specialized drywall types.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide