Swivl

How Much Does Home Remodeling Cost in ?

$100 – $200 per sq ft

Most homeowners in Loganville, GA, can expect to pay around $100 to $200 per square foot for home remodeling. The primary cost drivers are the complexity of the work, the quality of materials selected, and any necessary corrective work.

Home remodeling cost by tier

What most Loganville homeowners pay at each tier.

Basic

$70 – $100per sq ft

Basic renovations with standard finishes and minimal complex work.

Mid-range

$100 – $200per sq ft

Renovations with a balanced scope, including some upgrades and moderate complexity.

Premium

$200 – $300per sq ft

Extensive gut restorations or whole-home remodels with high-end finishes and significant structural changes.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what home remodeling typically costs in Loganville, GA. The page shows a range of $70–$300 per sq ft, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

Homeowners in Loganville, GA, looking to remodel can expect a significant range in project costs. While a complete overhaul can transform your living space, understanding the financial commitment upfront is crucial. For most home remodeling projects in Loganville, you can anticipate spending $100–$200 per square foot.

This typical range covers a wide variety of renovations, from updating a single room to significant improvements across multiple areas. However, the overall cost can fluctuate significantly, with projects potentially falling anywhere from $70 to $300 per square foot, depending on the scale and luxury of the changes you envision.

Cost Comparison

TierPrice RangeWhat's Included
Basic$70–$100 per sq ftBasic renovations with standard finishes and minimal complex work.
Mid-range$100–$200 per sq ftRenovations with a balanced scope, including some upgrades and moderate complexity.
Premium$200–$300 per sq ftExtensive gut restorations or whole-home remodels with high-end finishes and significant structural changes.

Labor Costs

Type of ProfessionalAverage Hourly Rate (Appx.)Notes
General ContractorVaries (often 10-20% of project total)Manages the entire project, coordinates trades.
Electrician$65 – $85Installing or upgrading electrical systems.
Plumber$70 – $120For plumbing fixture installation or pipe work.
Drywall Installer$40 – $70Installation and finishing of drywall.
Painter$30 – $50Interior and exterior painting services.

Key Cost Factors

  • Scope of Work: The more extensive your renovation, including structural changes, additions, or reconfigurations, the higher the cost per square foot will be. A gut restoration, for example, will naturally be more expensive than minor cosmetic updates.
  • Material Quality: The choice between standard, mid-range, or high-end finishes and materials significantly impacts the budget. Designer fixtures, custom cabinetry, and premium flooring will push costs towards the higher end of the spectrum.
  • Age and Condition of Home: Older homes, especially those in disrepair, often require additional work like asbestos removal, lead paint remediation, or significant structural repairs, which add to the overall expense.
  • Permits and Inspections: Depending on the nature and scope of your renovation, various permits are required by Loganville authorities. The fees for these permits and subsequent inspections contribute to the project cost.
  • Labor Rates: The rates of skilled tradespeople and general contractors can vary based on their experience, reputation, and demand in the Loganville area. High-quality craftsmanship often comes with a higher price tag.
  • Unexpected Issues: During a remodeling project, especially in older homes, unforeseen problems like water damage, pest infestations, or outdated wiring can be discovered, leading to additional costs and delays.

Regional Pricing

LocationTypical Cost per Square FootNotes
Loganville, GA$100–$200Reflects local market conditions and availability of contractors.
Atlanta, GA$70–$100 (starting)Costs in a major metropolitan area can vary significantly, with starting points sometimes lower but quickly escalating with complexity.
Georgia State Average$100–$200Provides a general benchmark across the state for comparable projects.

Tips for Hiring

  1. Obtain Multiple Quotes: Always get at least three detailed bids from different contractors. This allows you to compare pricing, scope of work, and contractor experience for your Loganville home remodeling project.
  2. Check References and Portfolios: Ask for references from past clients and review their portfolio to ensure their style and quality of work align with your vision. Look for contractors with experience in projects similar to yours.
  3. Verify Licensing and Insurance: Ensure the contractor is properly licensed and insured in Georgia. This protects you from liability in case of accidents or damage during the renovation.
  4. Get a Detailed Contract: A comprehensive contract should outline all aspects of the project, including the scope of work, materials, timeline, payment schedule, and a clear change order process. This helps prevent misunderstandings and disputes.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 7 home remodeling pros in Loganville, GA.

4 of 7 verified pros

See all 7 pros

Find Home Remodeling Contractors in Loganville, GA

Get free quotes from top-rated local contractors

FAQs

Common questions about home remodeling costs in Loganville, GA.

The average cost of home renovations in Georgia varies, but most projects range from $50,000 to $100,000. Per square foot, typical costs are $100–$200, though this can range from $70–$300 depending on the project's scope and materials.

A basic home remodel in Loganville, typically costing $70–$100 per square foot, includes standard finishes and minimal complex work. This might involve updating paint, flooring, and basic fixtures without major structural changes.

Key factors influencing renovation costs include the scope of work (e.g., cosmetic vs. structural changes), the quality of materials and finishes selected, the age and current condition of the home, labor rates, and the need for permits and inspections.

For a whole-home renovation, costs can vary significantly. A 1,250 to 1,600 square foot project might average around $52,133, but can range from $19,472 to $88,341. For a 2,000-square-foot house, a whole-home remodel can cost between $100,000 and $200,000.

Yes, renovating an older home can often be more expensive. These homes may require additional work such as updated electrical or plumbing systems, structural repairs, or remediation of hazardous materials like asbestos or lead paint, which add to the overall cost.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide