Swivl

How Much Does Paving Contractors Cost in ?

$3.48 – $10 per sq ft

Most homeowners can expect to pay between $3.48 and $10 per square foot for paving services. The overall cost is primarily driven by the material chosen and the total area to be paved.

Paving contractors cost by tier

What most Cleveland homeowners pay at each tier.

Basic

$2.72 – $4.23per sq ft

Basic asphalt paving installation for standard driveways.

Mid-range

$4.23 – $12per sq ft

Standard asphalt or similar material paving for medium-sized projects.

Premium

$12 – $20per sq ft

Premium paving materials or more complex installations for larger or specialized areas.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what paving contractors typically costs in Cleveland, GA. The page shows a range of $3–$20 per sq ft, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

Paving contractors in Cleveland, GA typically charge $3.48 to $10 per square foot for their services. This range reflects the most common types of paving projects homeowners undertake, from simple asphalt driveways to more elaborate installations. Understanding these costs is crucial for budgeting your paving project effectively.

While most homeowners can expect to pay within this typical range, the full spectrum of paving costs in Cleveland, GA can vary significantly, from $2.72 to $20 per square foot. This broader range accounts for highly specialized materials, complex site preparation, large-scale commercial projects, or intricate design requirements that might not be typical for a standard residential job. Factors such as the type of material chosen, the size and complexity of the project, site conditions, and contractor rates all play a role in determining the final price.

Cost Comparison

TierPrice Range per Square FootWhat's Included
Basic$2.72–$4.23Basic asphalt paving installation for standard driveways.
Mid-range$4.23–$12Standard asphalt or similar material paving for medium-sized projects.
Premium$12–$20Premium paving materials or more complex installations for larger or specialized areas.

Labor Costs

ServiceTypical Labor Cost Range (per project)
Asphalt Paving InstallationVaries by project size and complexity
Site Preparation (Clearing/Grading)Included in overall project cost, not typically separate hourly
Material DeliveryIncluded in overall project cost
Old Pavement RemovalMay be an additional charge, inquire with contractor
Sealcoating/Finishing TouchesIncluded in premium services or as an add-on

Key Cost Factors

  • Material Type: Asphalt is a common and often more affordable choice, while concrete, pavers, or decorative stones can significantly increase costs due to material and installation complexity.
  • Project Size and Shape: Larger areas generally benefit from economies of scale, meaning the per-square-foot cost might decrease. However, complex shapes or irregular layouts can increase labor time and material waste, driving up the price.
  • Site Preparation: The amount of work required to prepare the site, such as excavation, grading, and old pavement removal, heavily influences the total cost. A site requiring extensive earthwork will be more expensive.
  • Drainage Requirements: Proper drainage is critical for the longevity of paved surfaces. Installing or enhancing drainage systems can add to the overall project cost but is essential to prevent future issues.
  • Accessibility: Projects in hard-to-reach areas or those requiring specialized equipment for access can incur higher labor and equipment rental fees.
  • Permits and Fees: Depending on the scope and location of your project, you might need to obtain permits, which add to the administrative cost.

Regional Pricing

LocationAverage Paving Cost per Square Foot
Cleveland, GA$3.48–$10
Gray, GA$3.08–$10
Surrounding areasSimilar to Cleveland, GA, but can vary

Tips for Hiring

  1. Get Multiple Quotes: Contact several local paving contractors in Cleveland, GA, to compare bids. Obtain free price estimates from local masonry/concrete contractors to ensure you're getting a competitive rate. Look for transparent pricing and be wary of those charging hidden fees.
  2. Check References and Reviews: Look for contractors with a proven track record. Yelp can be a good resource for finding "TOP 10 BEST Driveway Paving" contractors in your area.
  3. Verify Licensing and Insurance: Ensure the contractor is properly licensed and insured to protect yourself from liability in case of accidents or damage during the project.
  4. Review the Contract Thoroughly: Make sure the contract details all aspects of the project, including materials, timelines, payment schedules, and what's included in the quote. A reliable contractor, like K & K Asphalt and Seal Coating Paving, will never charge additional costs over their original estimate.

FAQs

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 1 paving contractors pros in Cleveland, GA.

SA
SCC Asphalt Surfaces LLC3.0Cleveland, GA

1 of 1 verified pros

See all 1 pros

Are you a contractor? See job pricing for paving contractors in Cleveland, GA

Find Paving Contractors Contractors in Cleveland, GA

Get free quotes from top-rated local contractors

View More

Paving Contractors costs in cities near Cleveland

Prices in nearby GA cities. Looking for another? Switch cities from the heading above.

Savannah, GA$2 – $25 /sq ftAcworth, GA$3 – $27 /sq ftMacon, GA$2.99 – $8 /sq ftKennesaw, GA$0.15 – $20 /sq ftAtlanta, GA$5 – $10 /sq ftBrunswick, GA$2 – $30 /sq ftConyers, GA$2.41 – $10 /sq ftStockbridge, GA$2.41 – $20 /sq ft

FAQs

Common questions about paving contractors costs in Cleveland, GA.

Paving a driveway in Cleveland, GA typically costs between $3.48 and $10 per square foot. However, prices can range from $2.72 to $20 per square foot depending on materials and complexity.

Key factors include the type of material (asphalt, concrete, pavers), the size and shape of the area to be paved, the amount of site preparation needed (excavation, grading, old pavement removal), drainage requirements, and the accessibility of the work site.

Generally, asphalt paving tends to fall into the basic to mid-range cost tiers, often being a more budget-friendly option for standard driveways. Concrete, pavers, or specialized materials typically fall into the mid-range to premium tiers due to higher material costs and more intricate installation processes.

Yes, it is highly recommended to get free price estimates from several local paving contractors. This allows you to compare costs, understand what's included in different proposals, and ensures you find a contractor with transparent pricing who won't charge hidden fees.

To choose a reputable contractor, look for companies with good reviews and references, verify that they are licensed and insured, and ensure they provide a detailed contract outlining all project specifics, costs, and timelines. Some contractors advertise not charging additional costs over their original quote, which is a good sign of transparency.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide