Swivl

How Much Does Paving Contractors Cost in ?

$3.08 – $7 per sq ft

Homeowners in Norcross, GA typically pay between $3.08 and $7 per square foot for paving services. The total cost is primarily driven by the material chosen (asphalt, concrete, or gravel) and the overall size of the paved area.

Paving contractors cost by tier

What most Norcross homeowners pay at each tier.

Basic

$2 – $3.08per sq ft

Paving with more affordable materials like gravel or entry-level asphalt, often for smaller areas.

Mid-range

$3.08 – $7per sq ft

Standard asphalt paving for driveways, balancing durability and cost.

Premium

$7 – $10per sq ft

Paving with higher-grade materials like concrete or specialized asphalt treatments, or for complex installations.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what paving contractors typically costs in Norcross, GA. The page shows a range of $2–$10 per sq ft, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

When considering paving contractors in Norcross, GA, homeowners are often looking for the best value and quality for their investment. Understanding the typical costs involved can help you budget effectively and compare quotes with confidence. Most homeowners in Norcross can expect to pay between $3.08 and $7 per square foot for paving services. This range covers standard asphalt paving for driveways and other common residential projects.

While the typical cost falls within this range, the full spectrum of paving projects can see prices ranging from $2 to $10 per square foot. This broader envelope accounts for everything from very basic gravel installations to premium concrete work or specialized paving solutions. By understanding these price points, you can better navigate your paving project, whether it's a simple repair or a comprehensive new driveway installation.

Cost Comparison

TierPrice RangeWhat's Included
Basic$2–$3.08 per sq ftPaving with more affordable materials like gravel or entry-level asphalt, often chosen for smaller areas or less frequently used surfaces.
Mid-range$3.08–$7 per sq ftStandard asphalt paving for driveways, offering a good balance of durability, aesthetics, and cost-effectiveness. This is what most homeowners in Norcross pay.
Premium$7–$10 per sq ftPaving with higher-grade materials such as concrete or specialized asphalt treatments, or for installations that involve complex designs, extensive site preparation, or custom finishes.

Labor Costs

Project TypeLabor Cost per Sq Ft
Asphalt Paving Installation (Georgia Average)$3.08 (Range: $2.41 - $3.75)
Asphalt Paving Repair (Georgia Average)$2.32
Marble Pavers Installation (Labor Only - outside Atlanta)$7

Key Cost Factors

  • Material Choice: The type of material significantly impacts the overall cost. Gravel is typically the most affordable at $1–$3 per square foot, followed by asphalt at $2–$5 per square foot. Concrete is generally more expensive, ranging from $4–$10 per square foot.
  • Project Size: Larger projects usually have a lower per-square-foot cost due to economies of scale. For example, a 400-square-foot driveway might cost $1,600 to $3,200, while a 600-square-foot driveway could range from $2,400 to $4,800.
  • Site Preparation: The amount of work required to prepare the site, such as excavation, grading, and old material removal, can add to the overall cost. Difficult terrain or existing paving removal will increase labor and equipment expenses.
  • Complexity and Design: Intricate designs, curves, multiple levels, or specialized drainage solutions will cost more than a simple, straight paving job. Custom finishes or patterns also fall into this category.
  • Accessibility: Projects in hard-to-reach areas or those requiring specialized equipment for access can incur additional charges for labor and machinery.

Regional Pricing

LocationTypical Paving Cost per Sq Ft
Norcross, GA$3.08–$7
Haddock, GA$3.08–$7
Atlanta, GA$5–$10
Georgia (State Average for Asphalt Installation)$3.08

Tips for Hiring

  1. Obtain Multiple Quotes: Always get estimates from at least three different paving contractors. This allows you to compare pricing, understand varying approaches to the project, and ensure you're getting a competitive rate.
  2. Check References and Reviews: Look for contractors with a strong track record and positive customer feedback. Websites like Yelp can be a good resource to find local highly-rated professionals.
  3. Verify Licensing and Insurance: Ensure your chosen contractor is properly licensed and insured. This protects you from liability in case of accidents or property damage during the project.
  4. Get a Detailed Contract: A clear, written contract should outline the scope of work, materials to be used, project timeline, payment schedule, and any warranties. This helps prevent misunderstandings and ensures all parties are on the same page.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 1 paving contractors pros in Norcross, GA.

1 of 1 verified pros

See all 1 pros

Find Paving Contractors Contractors in Norcross, GA

Get free quotes from top-rated local contractors

FAQs

Common questions about paving contractors costs in Norcross, GA.

The cost to pave a driveway in Georgia typically ranges from $3 to $7 per square foot for asphalt. A 1,000-square-foot asphalt driveway, common for two-car layouts, could cost between $3,000 and $7,000.

Key factors include the material chosen (e.g., asphalt, concrete, gravel), the size and complexity of the project, the amount of site preparation needed, and the overall accessibility of the work area.

Generally, asphalt is less expensive than concrete. Asphalt typically ranges from $2 to $5 per square foot, while concrete can range from $4 to $10 per square foot, making concrete a more durable but costly option.

To get an accurate estimate, it's recommended to contact several local paving contractors in Norcross, GA. Provide them with details about your project, including the desired material, size, and any specific requirements, and request written quotes.

The mid-range tier, typically costing $3.08–$7 per square foot, usually includes standard asphalt paving for driveways. This tier balances durability and cost, making it the most common choice for many homeowners.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide