Swivl

How Much Does Sealcoating Cost in ?

$0.25 – $0.90 per sq ft

Homeowners in Snellville, GA can expect to pay around $0.25 to $0.90 per square foot for driveway sealcoating. The final cost depends heavily on the surface condition, driveway material, and the extent of any necessary repairs or crack sealing.

Sealcoating cost by tier

What most Snellville homeowners pay at each tier.

Basic

$0.15 – $0.25per sq ft

Basic jobs for driveway sealcoating.

Mid-range

$0.29 – $0.65per sq ft

Premium asphalt sealcoat including some crack sealing and minor repairs, or sealcoating for a parking lot without additional services.

Premium

$0.80 – $1.50per sq ft

Comprehensive sealcoating services, typically for a high-end project or including extensive crack sealing and line striping for commercial lots.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what sealcoating typically costs in Snellville, GA. The page shows a range of $0–$2 per sq ft, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

Maintaining your asphalt driveway or parking lot is crucial for its longevity and aesthetic appeal, and sealcoating is a key part of that maintenance. For homeowners in Snellville, GA, understanding the potential costs involved in sealcoating can help in budgeting and choosing the right service provider. Most homeowners can expect to pay $0.25–$0.9 per square foot for sealcoating services. This typical range covers a wide variety of asphalt surfaces and conditions, ensuring that most projects fall within these parameters.

While the typical cost provides a good starting point, the overall price for asphalt sealcoating can vary more broadly, ranging from $0.15 to $1.5 per square foot. This full envelope accounts for everything from the most basic residential sealcoating jobs to complex commercial projects involving extensive repairs and additional services. Several factors influence where your project will land within this range, including the size and condition of the surface, the type of sealant used, and any extra services like crack sealing or line striping.

Cost Comparison

TierPrice RangeWhat's Included
Basic$0.15–$0.25 per sq ftBasic jobs for driveway sealcoating, typically for residential homeowners.
Mid-range$0.29–$0.65 per sq ftPremium asphalt sealcoat including some crack sealing and minor repairs, or sealcoating for a parking lot without additional services.
Premium$0.8–$1.5 per sq ftComprehensive sealcoating services, typically for a high-end project or including extensive crack sealing and line striping for commercial lots.

Labor Costs

ServiceTypical Hourly RateDetails
General Sealcoating Labor$50-$100This rate covers the application of the sealant.
Crack Sealing$75-$120Specialized labor for effective crack repair before sealcoating.
Surface Preparation$40-$80Includes cleaning and prepping the asphalt surface.
Line Striping (Commercial)$60-$90 (per hour or per line)Post-sealcoating service to re-stripe parking lot lines.

Key Cost Factors

  • Size of the Area: Larger driveways or parking lots will naturally incur higher costs. Commercial sealcoating costs can vary significantly based on square footage.
  • Condition of the Existing Asphalt: Extensive cracks, potholes, or other damage will require repairs before sealcoating, increasing the overall price. For a premium asphalt sealcoat that includes some crack sealing and minor repairs, the cost typically ranges from $0.29 to $0.48 per square foot.
  • Type of Sealant Used: Different sealants offer varying levels of durability and protection, with more premium products costing more.
  • Number of Coats: While some basic jobs might only need one coat, a second coat can offer enhanced protection and longevity, adding to the cost. Often, two coats are recommended for optimal results.
  • Additional Services: Services like crack sealing, line striping, or oil spot treatment will add to the total cost. Asphalt Seal Coating, Crack Sealing & Line Striping can cost $0.65 – $0.90 per sq. ft.
  • Accessibility: Difficult-to-access areas may require more time and specialized equipment, potentially increasing labor costs.

Regional Pricing

LocationAverage Cost Range per Sq Ft
Snellville, GA$0.25–$0.9
Buford, GA$0.29 to $0.48 (Premium, with repairs)
Other areas (national average)$0.15 to $0.25 (Basic jobs)

Tips for Hiring

  1. Get Multiple Quotes: Always gather at least three detailed quotes from different contractors in Snellville, GA, to compare pricing and services. Remember that for residential homeowners hiring a contractor to seal coat your driveway, expect to pay between 25¢ to 45¢ per square foot.
  2. Check References and Reviews: Look for contractors with a strong track record and positive customer feedback. A reputable company will be transparent about their processes and pricing.
  3. Understand What's Included: Ensure your quote clearly outlines all services, including surface preparation, crack sealing, number of sealant coats, and clean-up. If your parking lot only requires sealcoating, the cost will be on the lower end.
  4. Inquire About Sealant Type: Ask about the type of sealant they plan to use and its expected lifespan. Different sealants offer varying levels of protection and durability appropriate for different needs.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 1 sealcoating pros in Snellville, GA.

1 of 1 verified pros

See all 1 pros

Find Sealcoating Contractors in Snellville, GA

Get free quotes from top-rated local contractors

FAQs

Common questions about sealcoating costs in Snellville, GA.

Generally, it's recommended to sealcoat your asphalt driveway every 2-3 years. However, this can vary based on traffic, weather exposure, and the initial quality of the application.

For basic residential driveway sealcoating jobs, homeowners typically pay $0.15–$0.25 per square foot. However, for a premium asphalt sealcoat that includes crack sealing and minor repairs, costs can range from $0.29 to $0.48 per square foot.

Not always. Basic sealcoating typically does not include extensive crack repair. If your asphalt has significant cracks, inquire about premium services that include crack sealing, which can increase the cost to $0.29–$0.65 per square foot or more, depending on the extent of the repair.

Several factors can increase the cost, including a larger surface area, poor condition of the asphalt requiring extensive repairs, the use of premium sealants, additional services like line striping for commercial lots, and multiple coats of sealant. Comprehensive services can reach $0.8–$1.5 per square foot.

Typically, sealcoating takes 24 to 48 hours to dry completely before you can drive or walk on the surface. The exact drying time can depend on weather conditions like temperature and humidity.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide