Swivl

How Much Does Sewer Jetting Cost in ?

$450 – $1k per job

Most homeowners in Savannah, GA can expect to pay between $450 and $1,000 for sewer jetting. The exact price will vary depending on the severity and location of the clog, as well as the specific plumbing company hired.

Sewer jetting cost by tier

What most Savannah homeowners pay at each tier.

Basic

$192.62 – $449per job

Fixed fee for basic sewer line cleaning.

Mid-range

$450 – $700per job

Average hydro jet cleaning for common tough clogs.

Premium

$701 – $1.1kper job

Hydro jetting for main sewer lines with extensive blockages.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what sewer jetting typically costs in Savannah, GA. The page shows a range of $193–$1,100 per job, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

When your drains are slow or completely clogged, sewer jetting can be a highly effective solution to restore proper flow to your plumbing system. Homeowners in Savannah, GA, often choose sewer jetting, also known as hydro-jetting, for its ability to clear even the toughest blockages. This powerful cleaning method uses high-pressure water to scour the inside of pipes, removing grease, scale, roots, and other debris that traditional snaking might leave behind.

The typical cost for sewer jetting in Savannah, GA, ranges from $450 to $1000 per job. While this represents what most homeowners can expect to pay, the full envelope of pricing can range from $192.62 to $1100 per job, depending on the complexity of the job and the extent of the blockage. Understanding these costs and the factors that influence them will help you compare quotes effectively and make an informed decision for your home.

Cost Comparison

TierPrice RangeWhat's Included
Basic$192.62–$449 per jobFixed fee for basic sewer line cleaning.
Mid-range$450–$700 per jobAverage hydro jet cleaning for common tough clogs.
Premium$701–$1100 per jobHydro jetting for main sewer lines with extensive blockages.

Labor Costs

Service TypeAverage Cost Per Hour
Main Sewer Line Specialist$45–$200
General Plumbing LaborVaries greatly
Emergency Service (After-hours/Weekend)Higher than standard

Key Cost Factors

  • Severity of the Clog: The more extensive or stubborn the blockage, such as heavy root intrusion or significant grease buildup, the longer and more intensive the hydro-jetting process will be, increasing costs.
  • Location and Accessibility of the Clog: Clogs located deep within the main sewer line or in hard-to-reach areas of your property will require more effort and specialized equipment, leading to higher labor costs.
  • Pipe Size and Length: Larger diameter pipes and longer sewer lines require more water volume and longer cleaning times, which can impact the overall cost of the service.
  • Pre-Jetting Inspection: Many plumbers recommend a camera inspection before hydro-jetting to assess the condition of the pipes and the nature of the blockage. This might be an additional cost but can prevent future issues.
  • Emergency Service: If you require immediate service outside of normal business hours, such as evenings, weekends, or holidays, you can expect to pay a premium for emergency hydro-jetting services.

Regional Pricing

LocationTypical Cost for Sewer Jetting
Savannah, GA$450–$1000 per job
Beaufort, SCSimilar to Savannah, GA
Chatham CountyIn line with Savannah, GA

Tips for Hiring

  1. Gather Multiple Quotes: Contact several local plumbers in Savannah, GA, like those found on Angi or Yelp, to get detailed quotes. This allows you to compare pricing and services offered.
  2. Ask for a Written Estimate: Always request a written estimate that outlines all anticipated costs, including labor, equipment, and any potential extra charges, before any work begins.
  3. Inquire About Experience and Equipment: Ensure the company has experience with hydro-jetting and uses appropriate, well-maintained equipment for the job. Companies like Canady's and Roto-Rooter specialize in drain and sewer services.
  4. Confirm Licensing and Insurance: Verify that the plumbing contractor is licensed and insured. This protects you in case of any accidents or damages during the service.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 1 sewer jetting pros in Savannah, GA.

CM
Consolidated Mechanical / PlumbingSavannah, GA

1 of 1 verified pros

See all 1 pros

Are you a contractor? See job pricing for sewer jetting in Savannah, GA

Find Sewer Jetting Contractors in Savannah, GA

Get free quotes from top-rated local contractors

View More

Sewer Jetting costs in cities near Savannah

Prices in nearby GA cities. Looking for another? Switch cities from the heading above.

Atlanta, GA$49 – $1.1k /jobMarietta, GA$90 – $1.8k /jobCheyenne, WY$150 – $2k /jobDunwoody, GA$89 – $4k /jobAlpharetta, GA$49 – $1.5k /jobConyers, GA$93 – $1.5k /jobSocial Circle, GA$380 – $600 /jobHamilton, GA$100 – $2k /job

FAQs

Common questions about sewer jetting costs in Savannah, GA.

Sewer jetting, also known as hydro-jetting, is a process that uses high-pressure water streams to thoroughly clean the interior of your sewer lines. A specialized nozzle is inserted into the pipe, releasing water at pressures strong enough to break apart and flush away tough clogs, grease, sediment, tree roots, and other debris, restoring the pipe to its optimal flow capacity.

The frequency of sewer jetting depends on several factors, including the age of your plumbing system, the type of debris common in your lines, and past issues with clogs. For homes with frequent blockages or older pipes prone to root intrusion, an annual or biennial jetting might be beneficial. For others, it may only be needed as problems arise. Your plumber can recommend a suitable maintenance schedule.

When performed by a trained and experienced professional, sewer jetting is generally safe for most plumbing systems. However, if your pipes are old, corroded, or severely damaged, the high pressure could potentially worsen existing weaknesses. It's often recommended to have a camera inspection before hydro-jetting to assess pipe condition and ensure it's a suitable method for your specific situation.

Snaking primarily involves a cable with an auger head that physically punches through blockages, creating a hole for water to flow. While effective for simple clogs, it often leaves residue behind. Hydro-jetting, on the other hand, thoroughly cleans the entire circumference of the pipe using high-pressure water, removing all buildup and giving a more complete clean, which can prevent future clogs for a longer period.

Common signs that you might need sewer jetting include slow draining sinks, tubs, and toilets, gurgling noises coming from drains or toilets, foul odors emanating from drains, and recurring clogs that snaking doesn't fully resolve. If you're experiencing multiple fixtures backing up, especially on the lowest level of your home, it's a strong indication of a main sewer line blockage.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide