Swivl

How Much Does Swimming Pool Construction Cost in ?

$65k – $120k per job

Most homeowners in Twin City, GA can expect to pay between $65,000 and $120,000 for inground pool construction. The final cost largely depends on the type of pool (vinyl liner, fiberglass, or concrete) and custom features.

Swimming pool construction cost by tier

What most Twin City homeowners pay at each tier.

Basic

$30k – $65kper job

A basic vinyl liner pool installation.

Mid-range

$65k – $90kper job

A standard fiberglass pool or a more elaborate vinyl liner pool, potentially with some included features like a salt water generator.

Premium

$90k – $225kper job

A premium fiberglass or concrete (gunite) pool, possibly with a spa and additional features like a travertine patio.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what swimming pool construction typically costs in Twin City, GA. The page shows a range of $30,000–$225,000 per job, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

Considering adding a refreshing escape to your backyard in Twin City, GA? Building a swimming pool is a significant investment that can greatly enhance your home's value and your family's quality of life. For most homeowners in Twin City, the cost to construct a swimming pool typically ranges from $65,000 to $120,000 per job. Understanding the various factors that influence this price is crucial for effective budgeting and project planning.

While the typical range provides a good starting point, the full spectrum of swimming pool construction costs can vary widely, from as low as $30,000 for a basic installation to over $225,000 for a luxurious, custom-designed pool with extensive features. This guide will break down the costs associated with different types of pools, key factors influencing pricing, and provide tips for navigating the hiring process so you can make an informed decision for your Twin City home.

Cost Comparison

TierPrice RangeWhat's Included
Basic$30,000–$65,000 per jobA basic vinyl liner pool installation.
Mid-range$65,000–$90,000 per jobA standard fiberglass pool or a more elaborate vinyl liner pool, potentially with some included features like a salt water generator.
Premium$90,000–$225,000 per jobA premium fiberglass or concrete (gunite) pool, possibly with a spa and additional features like a travertine patio.

Labor Costs

TaskEstimated Percentage of Total Project Cost
Excavation & Site Preparation10-15%
Plumbing & Electrical8-12%
Pool Installation (Shell/Liner)20-30%
Decking & Coping10-15%
Finishing & Landscaping5-10%

Key Cost Factors

  • Pool Type: The material of your pool (vinyl liner, fiberglass, or concrete/gunite) is one of the most significant cost drivers. Vinyl liner pools tend to be the least expensive, starting around $30,000, while fiberglass pools typically range from $65,000 to $200,000, and concrete (gunite) pools often start at $95,000 and can go up to $225,000 or more.
  • Size and Depth: Larger and deeper pools require more materials, excavation, and labor, directly increasing the overall cost. For example, a 15x30 gunite pool with a spa might be around $125,000 or up.
  • Features and Add-ons: Custom features like spas, waterfalls, lighting, salt water generators, heating systems, and automated cleaning systems can significantly increase the price. A salt water generator for even a mid-range pool could be included in the $65,000-$90,000 range.
  • Decking and Landscaping: The type and amount of decking, such as concrete, pavers, or travertine ($125,000+ for a 300 sq ft travertine patio with a gunite pool and spa), and any surrounding landscaping or fencing will add to the total investment.
  • Site Accessibility and Preparation: Difficult-to-access yards, rocky soil, or slopes can require more extensive excavation and specialized equipment, leading to higher site preparation costs.
  • Permits and Inspections: Local permits and necessary inspections are mandatory and contribute to the upfront costs, though often included in the overall quote, as mentioned for prices ranging from less than $60,000 to upwards of $70,000 in Rincon, GA which includes permits.

Regional Pricing

LocationAverage Price RangeNotes
Twin City, GA$65,000–$120,000Typical cost for pool construction in the area.
Atlanta, GA$30,000–$120,000+Vinyl liner pools as low as $30,000, with higher-end options exceeding $120,000.
Savannah, GA AreaLess than $60,000 to upwards of $70,000+Includes permits, Wi-Fi pump, salt water generator, filter, and electric.

Tips for Hiring

  1. Get Multiple Quotes: Always obtain detailed quotes from at least three different reputable pool builders in the Twin City area. This allows you to compare pricing, services, and ensure you're getting a competitive rate for the scope of work you desire.
  2. Verify Licensing and Insurance: Ensure that any contractor you consider hiring is properly licensed and insured. This protects you from liability in case of accidents or issues during the construction process.
  3. Check References and Reviews: Ask for references from previous clients and check online reviews. A builder with a strong track record of satisfied customers is often a sign of reliability and quality workmanship.
  4. Understand the Contract: Thoroughly read and understand the entire contract before signing. It should clearly outline the scope of work, materials, timeline, payment schedule, warranty information, and what is and isn't included in the total price.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 1 swimming pool construction pros in Twin City, GA.

1 of 1 verified pros

See all 1 pros

Find Swimming Pool Construction Contractors in Twin City, GA

Get free quotes from top-rated local contractors

FAQs

Common questions about swimming pool construction costs in Twin City, GA.

Construction is generally the most expensive part of a pool's total cost. Nearly half of your total budget can be spent before you even choose specific design elements, covering aspects like excavation, materials for the pool shell, and initial labor.

Generally, vinyl liner pools are the least expensive option, starting around $30,000. Fiberglass pools typically fall in the mid-range, from $65,000 to $200,000, while concrete (gunite) pools are usually the most expensive, often starting around $95,000 and going up to $225,000 or more.

The timeline can vary significantly based on the pool type, size, features, and weather. A basic vinyl liner pool might be built in a few weeks, while a complex concrete pool with extensive landscaping could take several months.

Homeowners often overlook costs for decking and patio materials, landscaping around the pool, fencing for safety and legal compliance, and ongoing maintenance supplies and chemicals. Permits and unexpected site preparation challenges can also add to the final bill.

Yes, while a salt water generator offers benefits, it is an additional feature that will add to the initial cost of your pool. However, for mid-range pools, an included salt water generator might be part of the $65,000-$90,000 price range, so it's essential to clarify what's included in your quote.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide