Swivl

How Much Does Wiring Cost in Lawrenceville, GA?

$2k – $10k per job

Wiring cost per job

Most homeowners in Lawrenceville, GA can expect to pay around $2,000 to $10,000 for wiring projects, with the cost largely depending on the scope of work and the materials used. The size of the home and the complexity of the installation are major price drivers.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what wiring typically costs in Lawrenceville, GA. The page shows a range of $1,100–$20,000 per job, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Wiring cost by tier

What most Lawrenceville homeowners pay at each tier.

Basic$1.1k – $4.4kper job

Installation of a few outlets or basic wiring repairs with aluminum wire.

Mid-range$4.4k – $7kper job

More extensive wiring, potentially including copper wire for some sections, or a smaller portion of a house rewire.

Premium$7k – $20kper job

A full house rewire using high-quality copper wiring and comprehensive electrical upgrades.

When it comes to maintaining the safety and functionality of your home in Lawrenceville, GA, ensuring your electrical wiring is up to par is crucial. Whether you're dealing with old, hazardous wiring, planning an addition, or simply need a few new outlets, understanding the potential costs involved is the first step. For most homeowners in Lawrenceville, the cost of wiring projects typically falls between $2,000 and $10,000 per job.

However, the total cost can vary significantly based on the project's scope and complexity. The full envelope for wiring services in Lawrenceville can range from $1,100 for minor repairs to as much as $20,000 for extensive whole-house rewiring or advanced electrical upgrades. These price fluctuations depend on factors such as the type of wiring material used, the size of your home, and the specific services required.

Cost Comparison

TierPrice RangeWhat's Included
Basic$1,100–$4,410 per jobInstallation of a few outlets or basic wiring repairs, potentially with aluminum wire.
Mid-range$4,410–$7,000 per jobMore extensive wiring, potentially including copper wire for some sections, or a smaller portion of a house rewire.
Premium$7,000–$20,000 per jobA full house rewire using high-quality copper wiring and comprehensive electrical upgrades.

Labor Costs

ServiceAverage Cost / Rate
Electrician Hourly Rate$48 to $95 per hour (in Atlanta, GA, which may reflect Lawrenceville rates)
Initial Service Call$49 (average for Electrical Installers in Lawrenceville, GA)
First Hour of Electrical JobMore than subsequent hours (generally true for electricians)
Material Cost (Copper Wire)$5,910 (for wire/conduit alone)
Material Cost (Aluminum Wire)$4,410 (for wire/conduit alone)

Key Cost Factors

  • Scope of Work: The biggest determinant, ranging from installing a few outlets to a full house rewire. A full house rewire can cost between $2 to $4 per square foot.
  • Type of Wiring Material: Copper wiring is generally more expensive than aluminum wiring. For wire/conduit alone, copper can cost around $5,910, while aluminum might be around $4,410.
  • Age and Condition of Existing Wiring: Older homes with outdated or hazardous wiring (like aluminum wire) will likely incur higher costs for replacements and upgrades.
  • Accessibility: Wiring in easily accessible areas will be less labor-intensive and thus less expensive than wiring in walls, ceilings, or crawl spaces.
  • Permits and Inspections: Many electrical projects require permits, which add to the overall cost and ensure safety and compliance with local codes.
  • Emergency Service: Urgent repairs often come with a premium for immediate availability outside of standard business hours.

Regional Pricing

LocationAverage Cost / Rate
Lawrenceville, GA$2,000–$10,000 (typical wiring job)
Lawrenceville, GA (Service Call)$49 (average price for Electrical Installers)
Atlanta, GA (Electrician Hourly)$48 to $95 per hour
Georgia (Rewiring per sq ft)$2 to $4 per square foot (for materials and labor)

Tips for Hiring

  1. Get Multiple Quotes: Always obtain free estimates from several qualified electricians in Lawrenceville to compare pricing and services. This helps ensure fair pricing and allows you to understand the work proposed by each contractor.
  2. Verify Licensing and Insurance: Ensure any electrician you consider is licensed, bonded, and insured. This protects you in case of accidents or faulty work.
  3. Check Reviews and References: Look for electricians with positive reviews on platforms like Thumbtack or Yelp. Ask for references from past clients to gauge their reliability and quality of work.
  4. Understand the Estimate: A detailed estimate should clearly outline labor costs, material costs, permit fees, and any other potential expenses. Be wary of quotes that seem unusually low or lack specificity.

Find Wiring Contractors in Lawrenceville

Get free quotes from top-rated local contractors

Frequently Asked Questions

Common questions about costs and estimates for this service.

Rewiring a house in Lawrenceville, GA, can range from $2,000 to $20,000, with most homeowners paying around $10,000 for a complete rewire. This is often based on the home's square footage, typically costing $2 to $4 per square foot including materials and labor.

For basic wiring repairs or the installation of a few outlets, homeowners in Lawrenceville can expect to pay between $1,100 and $4,410. This cost can vary depending on the complexity of the repair and the type of wiring used.

While specific Lawrenceville hourly rates can vary, electricians in the broader Atlanta, GA, area typically charge between $48 to $95 per hour. The first hour of an electrical job often costs more than subsequent hours.

In Georgia, homeowners are permitted to do their own electrical work. However, if you are not a Licensed Master Electrician, you will need to submit applicable wiring diagrams and details for review, as you are responsible for the work's compliance and safety.

Several factors influence the cost, including the scope of the work (e.g., a few outlets vs. a whole-house rewire), the type of wiring material (copper being more expensive than aluminum), the age of your current wiring, accessibility of the work area, and the need for permits or emergency services.