Cold Formed Metal Framing / Metal Studs
Loading...
Loading...
The typical cost for cold formed metal framing materials ranges from $1.27 to $1.86 per linear foot. This pricing primarily reflects the cost of the metal studs themselves, with thicker gauges or wider profiles generally increasing the per-linear-foot price.
Contractor? Create instant estimates with AI and win more jobs.
Try Now for free!What most Simpsonville customers get at each price point.
Material for standard 400S162-43 or 400T200-43 metal studs.
Material for slightly heavier 600S162-43 or 600T200-43 metal studs.
Material for robust 800S162-43 metal studs.
Click any value to edit, All fields are fully customisable
$2,063.68
Total Estimate Amount
MAX can make mistakes.
This is a Preliminary Estimate
This estimator provides a starting point based on typical jobs. Actual costs may vary based on site conditions, material availability, permit requirements, and other factors discovered during work. We recommend a site visit before providing final pricing to customers.
This estimate is based on typical job parameters. Review and adjust for your specific situation. Standard market rates for your region, mid-grade materials unless specified, standard business hours labor rates, typical job complexity without major complications, basic cleanup included in labor time.
Job complexity
Simple repairs cost less than full installations or replacements. Multi-step jobs requiring permits or inspections add to the total.
Material quality
Budget, mid-grade, and premium materials can swing the price significantly. Discuss options with your contractor to find the right balance.
Local labor rates
Labor costs vary by region, season, and demand. Urban areas and peak seasons typically have higher rates than rural or off-peak times.
Site conditions
Difficult access, older structures, code upgrades, or unexpected issues discovered during work can increase the final cost.
Every contractor prices differently. Create a free account to set custom labor rates, material markups, and default margins that match your business.
Compare local pros and get free quotes
Common questions about costs and estimates for this service.
To estimate metal stud framing, first measure the perimeter of the room or area to determine the linear feet. Then, decide on the spacing between the steel studs, typically 16 or 24 inches on center. Multiply the linear feet by the number of studs per linear foot (based on spacing) and add an extra stud for safety and waste.
The typical material cost for cold-formed metal framing in Simpsonville, SC, ranges from $1.27–$1.86 per linear ft, depending on the stud gauge and size.
Installation costs for metal stud framing typically fall between $3.50 and $7.50 per square foot, though this can vary based on project complexity and local labor rates.
Yes, there are different tiers. Basic studs like the 400S162-43 or 400T200-43 are generally $1.27 per linear ft. Mid-range options like the 600S162-43 or 600T200-43, which are slightly heavier, cost around $1.56 per linear ft. Premium, more robust studs such as the 800S162-43 are approximately $1.86 per linear ft.
For commercial jobs, metal framing costs slightly more, typically ranging from $12 to $40 per square foot for materials and installation. Wood framing, by comparison, costs between $7 and $16 per square foot installed.