Concrete Contracting
Loading...
Loading...
The typical cost for concrete contracting in Fayetteville, GA ranges from $8 to $13 per square foot. The main cost drivers are the type of concrete project (e.g., driveway vs. sidewalk) and the overall size of the job.
Contractor? Create instant estimates with AI and win more jobs.
Try Now for free!What most Fayetteville customers get at each price point.
Basic concrete installations like a 4-inch reinforced slab on grade or simple sidewalks.
Standard concrete projects such as driveways, larger sidewalks, or projects over 300 square feet with a broom finish.
Smaller, more intricate concrete projects under 300 square feet with a broom finish, or projects requiring more detailed work.
Click any value to edit, All fields are fully customisable
$2,063.68
Total Estimate Amount
MAX can make mistakes.
This is a Preliminary Estimate
This estimator provides a starting point based on typical jobs. Actual costs may vary based on site conditions, material availability, permit requirements, and other factors discovered during work. We recommend a site visit before providing final pricing to customers.
This estimate is based on typical job parameters. Review and adjust for your specific situation. Standard market rates for your region, mid-grade materials unless specified, standard business hours labor rates, typical job complexity without major complications, basic cleanup included in labor time.
Job complexity
Simple repairs cost less than full installations or replacements. Multi-step jobs requiring permits or inspections add to the total.
Material quality
Budget, mid-grade, and premium materials can swing the price significantly. Discuss options with your contractor to find the right balance.
Local labor rates
Labor costs vary by region, season, and demand. Urban areas and peak seasons typically have higher rates than rural or off-peak times.
Site conditions
Difficult access, older structures, code upgrades, or unexpected issues discovered during work can increase the final cost.
Every contractor prices differently. Create a free account to set custom labor rates, material markups, and default margins that match your business.
Compare local pros and get free quotes
Common questions about costs and estimates for this service.
To calculate the cost of a concrete project, contractors should determine the total square footage, multiply by the appropriate per-square-foot rate based on the project's complexity (referencing basic, mid-range, or premium tiers), and then add any specific costs for materials, specialized finishes, site preparation, or additional labor. It's crucial to perform detailed quantity take-offs for concrete volume and consider regional labor and material costs.
In Fayetteville, GA, labor costs to pour a concrete slab typically range from $2 to $3 per square foot. This cost generally includes setting concrete forms and other initial preparation work associated with the pour.
The cost of a 10-yard truck of concrete in Georgia generally ranges between $1,200 and $1,500, depending on the specific mix and supplier. This capacity is sufficient for projects like a 10x10 slab that is 4 inches thick (which requires about 1.23 cubic yards of concrete).
Project size significantly impacts pricing. Larger projects over 300 square feet often fall into the mid-range (e.g., $8–$13 per sq ft), sometimes benefiting from economies of scale. Smaller, more intricate projects under 300 square feet, even with a broom finish, typically command premium pricing (e.g., $13–$16 per sq ft) due to higher labor intensity and setup costs relative to the overall area.
You should consider charging premium rates for concrete work when projects are smaller (under 300 sq ft), intricate, or require specialized finishes or detailed craftsmanship. These projects demand more focused attention, skilled labor, and often have higher overhead per square foot compared to larger, more straightforward installations.