Custom Built Fencing
Loading...
Loading...
Custom built fencing in Kennesaw, GA, typically costs between $14 and $40 per linear foot, though prices can range from $8 to $45 per linear foot depending on the materials used. The primary cost drivers are the type of fencing material (e.g., chain link vs. vinyl or cedar) and terrain complexity, which impacts labor rates.
Contractor? Create instant estimates with AI and win more jobs.
Try Now for free!What most Kennesaw customers get at each price point.
Basic installation for materials like chain-link or pressure-treated pine on easy terrain.
Installation for materials such as cedar or vinyl fencing, possibly with some complex terrain.
High-end materials like aluminum or steel fencing, with installations that may involve complex terrain or custom features.
Click any value to edit, All fields are fully customisable
$2,063.68
Total Estimate Amount
MAX can make mistakes.
This is a Preliminary Estimate
This estimator provides a starting point based on typical jobs. Actual costs may vary based on site conditions, material availability, permit requirements, and other factors discovered during work. We recommend a site visit before providing final pricing to customers.
This estimate is based on typical job parameters. Review and adjust for your specific situation. Standard market rates for your region, mid-grade materials unless specified, standard business hours labor rates, typical job complexity without major complications, basic cleanup included in labor time.
Job complexity
Simple repairs cost less than full installations or replacements. Multi-step jobs requiring permits or inspections add to the total.
Material quality
Budget, mid-grade, and premium materials can swing the price significantly. Discuss options with your contractor to find the right balance.
Local labor rates
Labor costs vary by region, season, and demand. Urban areas and peak seasons typically have higher rates than rural or off-peak times.
Site conditions
Difficult access, older structures, code upgrades, or unexpected issues discovered during work can increase the final cost.
Every contractor prices differently. Create a free account to set custom labor rates, material markups, and default margins that match your business.
Compare local pros and get free quotes
Common questions about costs and estimates for this service.
Labor costs can vary significantly based on terrain and material. For basic installations, expect to charge $8–$12/linear foot, while complex terrain can push this to $12–$18/linear foot. Remember that general skilled labor rates in Georgia are approximately $42/hour, and labor often accounts for about 50% of the total project cost.
The 'typical' range of $14–$40 per linear foot represents what most customers will pay for common materials and installation scenarios. The 'full envelope' of $8–$45 per linear foot encompasses the absolute cheapest options (like basic chain-link on easy terrain) up to the most premium materials and complex custom installations.
Terrain has a significant impact. Complex or sloped terrain can add 15% to 30% to your labor costs compared to easy, flat ground. This is due to increased difficulty in digging post holes, setting posts plumb, and navigating equipment.
Yes, material choice is a primary cost driver. Chain-link typically falls in the basic tier ($8–$18/linear foot), while pressure-treated pine is also in this range. Cedar and vinyl are mid-range ($18–$30/linear foot), with vinyl specifically noted as $20–$40/linear foot. High-end materials like aluminum ($25–$45/linear foot) and steel can reach the premium tier ($30–$45/linear foot).
For custom fences, assess the material, height, and any unique design elements, as these will influence both material and labor. For gates, factor in an additional cost of $150–$400 per gate, depending on its size, material, and complexity (e.g., automated versus manual).