Drywall & Acoustical
Loading...
Loading...
The typical cost for drywall installation in Cumming, GA ranges from $1.50 to $3 per square foot, including both material and labor. This pricing can fluctuate significantly based on the complexity of the job and specific finishing requirements.
Contractor? Create instant estimates with AI and win more jobs.
Try Now for free!What most Cumming customers get at each price point.
Basic installation of drywall with simple finishing.
Installation and finishing for standard rooms, potentially including some material costs.
Installation and finishing for more complex layouts or specific finish quality requirements.
Click any value to edit, All fields are fully customisable
$2,063.68
Total Estimate Amount
MAX can make mistakes.
This is a Preliminary Estimate
This estimator provides a starting point based on typical jobs. Actual costs may vary based on site conditions, material availability, permit requirements, and other factors discovered during work. We recommend a site visit before providing final pricing to customers.
This estimate is based on typical job parameters. Review and adjust for your specific situation. Standard market rates for your region, mid-grade materials unless specified, standard business hours labor rates, typical job complexity without major complications, basic cleanup included in labor time.
Job complexity
Simple repairs cost less than full installations or replacements. Multi-step jobs requiring permits or inspections add to the total.
Material quality
Budget, mid-grade, and premium materials can swing the price significantly. Discuss options with your contractor to find the right balance.
Local labor rates
Labor costs vary by region, season, and demand. Urban areas and peak seasons typically have higher rates than rural or off-peak times.
Site conditions
Difficult access, older structures, code upgrades, or unexpected issues discovered during work can increase the final cost.
Every contractor prices differently. Create a free account to set custom labor rates, material markups, and default margins that match your business.
Compare local pros and get free quotes
Common questions about costs and estimates for this service.
To calculate the square footage for drywall, you typically measure the length and height of each wall and multiply them to get the area. For ceilings, measure the length and width. Sum all these areas to get the total square footage. For openings like windows and doors, subtract their square footage, though some contractors may not subtract small openings due to the extra labor involved in cutting around them.
The 'installation and finishing' cost for drywall typically includes hanging the drywall sheets, taping the seams, applying multiple coats of joint compound (mudding), sanding to a smooth finish, and sometimes adding texture. This comprehensive cost covers both the labor and basic materials required to achieve a paint-ready surface.
To estimate the cost for a 20x20 room, you need to consider the wall height and ceiling. Assuming an 8-foot ceiling, the walls would total 640 sq ft (20+20+20+20 = 80 linear feet * 8 ft high = 640 sq ft). The ceiling would be 400 sq ft (20 * 20). Totaling 1040 sq ft. At the typical cost of $1.50-$3.00 per sq ft, the price would range from $1,560 to $3,120. This excludes very complex layouts or premium finishes.
Basic drywall finishes (like Level 2) generally involve taping and one layer of joint compound, adequate for areas hidden from view or where a simple textured finish will be applied. Premium finishes (like Level 4 or 5) involve multiple coats of joint compound, extensive sanding, and potentially a skim coat over the entire surface to achieve a nearly flawless, smooth wall, ideal for high-gloss paints or critical lighting conditions. This increases labor and material costs significantly.
Yes, the typical range of $1.50-$3.00 per square foot for drywall installation usually includes both materials (drywall sheets, joint compound, tape, screws, etc.) and labor. However, for specialized materials or very complex projects, contractors might itemize materials separately or specify that the per-square-foot rate primarily covers labor and basic materials.