Drywall Installation
Loading...
Loading...
In Tallahassee, FL homeowners generally pay between $1.50 and $4.50 per square foot for drywall installation, which covers both materials and labor. The total cost is primarily influenced by the type of drywall, the desired finish level, and ceiling heights.
Contractor? Create instant estimates with AI and win more jobs.
Try Now for free!What most Tallahassee customers get at each price point.
Installation of standard drywall sheets with basic finishing (mud and tape).
Installation of standard drywall with a smooth finish, potentially including some minor texturing.
Installation of specialized drywall (e.g., moisture-resistant, fire-rated) with a high-level, seamless finish.
Click any value to edit, All fields are fully customisable
$2,063.68
Total Estimate Amount
MAX can make mistakes.
This is a Preliminary Estimate
This estimator provides a starting point based on typical jobs. Actual costs may vary based on site conditions, material availability, permit requirements, and other factors discovered during work. We recommend a site visit before providing final pricing to customers.
This estimate is based on typical job parameters. Review and adjust for your specific situation. Standard market rates for your region, mid-grade materials unless specified, standard business hours labor rates, typical job complexity without major complications, basic cleanup included in labor time.
Job complexity
Simple repairs cost less than full installations or replacements. Multi-step jobs requiring permits or inspections add to the total.
Material quality
Budget, mid-grade, and premium materials can swing the price significantly. Discuss options with your contractor to find the right balance.
Local labor rates
Labor costs vary by region, season, and demand. Urban areas and peak seasons typically have higher rates than rural or off-peak times.
Site conditions
Difficult access, older structures, code upgrades, or unexpected issues discovered during work can increase the final cost.
Every contractor prices differently. Create a free account to set custom labor rates, material markups, and default margins that match your business.
Compare local pros and get free quotes
Common questions about costs and estimates for this service.
To estimate drywall installation costs, you'll need to calculate the total square footage of all wall and ceiling surfaces that require drywall. Once you have this figure, multiply it by your chosen per-square-foot rate, which typically ranges from $1.50 to $4.50 in Tallahassee for standard jobs. Remember to factor in material costs ($0.50-$0.80 per sq ft for sheets) and labor ($1.00-$2.70 per sq ft for hanging and finishing), as well as the desired finish level and any specialized drywall types.
A basic mud and tape job (often referred to as a Level 2 or 3 finish) is on the lower end of the pricing spectrum, costing around $1.50-$3.50 per square foot, as it primarily focuses on covering seams and fasteners without extensive sanding for a perfectly smooth surface. A smooth, paint-ready finish (Level 4 or 5) will be more expensive, falling into the mid-range to premium tiers ($2.00-$7.00 per square foot), due to the additional layers of compound, precise sanding, and skilled labor required to achieve a flawless surface.
The type of drywall significantly impacts the overall cost. Standard gypsum drywall is the most economical. However, specialized variations like moisture-resistant (green board), fire-rated (Type X), or soundproof drywall are more expensive per sheet. These specialized materials not only have a higher initial cost but can also sometimes require different handling or installation techniques, potentially increasing labor costs as well, placing projects using them often in the premium tier priced around $4.50-$7.00 per sq ft.
Room complexity and ceiling height directly influence bids by increasing labor time and potentially material waste. Rooms with numerous angles, curves, or architectural features require more precise cutting and fitting, which is time-consuming. High ceilings necessitate scaffolding or lifts, adding to equipment costs and enhancing safety considerations, all of which translate to higher labor hours and a higher per-square-foot rate, particularly for projects in the mid- to premium-range.
For a typical drywall installation in Tallahassee, labor costs generally make up a larger portion of the total price than material costs. Materials, primarily the drywall sheets themselves, average $0.50 to $0.80 per square foot. In contrast, labor for hanging and finishing can range from $1.00 to $2.70 per square foot. So, you can expect a labor-to-material ratio where labor typically accounts for roughly 60% to 75% of the total installation cost.