Kennesaw, GA
Paving
How to Price Paving Jobs in Kennesaw, GA
In Kennesaw, GA, most homeowners can expect to pay around $7 to $20 per square foot for paving. The cost is primarily driven by the materials chosen and the complexity of the job.
Typical Price Range$7 – $20Based on 2 paving contractors in Kennesaw
Contractor? Create instant estimates with AI and win more jobs.
Try Now for free!Paving cost by tier
What most Kennesaw customers get at each price point.
Basic$3 – $9per sq ft
Basic asphalt paving installation or standard materials like concrete.
Mid-range$9 – $20per sq ft
Standard materials like concrete for patios and walkways or mid-range asphalt jobs.
Premium$20 – $50per sq ft
Premium asphalt jobs or specialized materials like cobblestone pavers.
Calculate Your Estimate
Click any value to edit, All fields are fully customisable
$2,063.68
Total Estimate Amount
I need a quote for a 200 amp electrical panel upgrade for a residential property.
I've built your estimate for the 200 amp panel upgrade. Includes a lead electrician and apprentice for 4 hours, all materials (panel, breakers, wiring, conduit, grounding), tools, and vehicle costs. Total comes to $1,838.68 with margins.
Can you add permit costs too?
Done — I've added the electrical permit fee ($150) and final inspection coordination ($75) under Other. Your updated total is $2,063.68. Feel free to adjust any line items.
MAX can make mistakes.
Cost Breakdown
Margin %
16%Total Cost
$1,773.00Margin Value
$290.68Final Estimated Amount
$2,063.6816% above Market Rate
This is a Preliminary Estimate
This estimator provides a starting point based on typical jobs. Actual costs may vary based on site conditions, material availability, permit requirements, and other factors discovered during work. We recommend a site visit before providing final pricing to customers.
Estimate Assumptions
This estimate is based on typical job parameters. Review and adjust for your specific situation. Standard market rates for your region, mid-grade materials unless specified, standard business hours labor rates, typical job complexity without major complications, basic cleanup included in labor time.
What Affects Your Final Price
Job complexity
Simple repairs cost less than full installations or replacements. Multi-step jobs requiring permits or inspections add to the total.
Material quality
Budget, mid-grade, and premium materials can swing the price significantly. Discuss options with your contractor to find the right balance.
Local labor rates
Labor costs vary by region, season, and demand. Urban areas and peak seasons typically have higher rates than rural or off-peak times.
Site conditions
Difficult access, older structures, code upgrades, or unexpected issues discovered during work can increase the final cost.
Your rates. Your rules.
Every contractor prices differently. Create a free account to set custom labor rates, material markups, and default margins that match your business.
Top Paving Contractors in Kennesaw
Compare local pros and get free quotes
Paving
Frequently Asked Questions
Common questions about costs and estimates for this service.
For most homeowners, the installed cost of a 20x20 paver patio ranges from $6,000 to $14,000, depending on materials, site conditions, and design complexity. These prices usually include materials, base preparation, labor, and standard installation, but not every contractor scopes projects the same way.
The cost to pave 1000 sq. ft. will depend on the material and complexity. Using the typical range of $7–$20 per sq. ft., a 1000 sq. ft. project could range from $7,000 to $20,000 for standard installations. More premium options could cost significantly more.
To estimate the cost for a 300 sq. ft. driveway, multiply the square footage by the per-square-foot cost. For reference, a 400-square-foot residential driveway can cost between $1,200 and $3,500. A 300 sq. ft. driveway would therefore fall within a similar proportional range, depending on the chosen materials and job complexity.
A 1,500-square-foot asphalt project for new installations can range from $10,500 to $22,500, with asphalt averaging $7 to $13 per square foot installed. This cost will vary based on the thickness of the asphalt, site preparation requirements, and local labor rates.
Labor costs for pavers can vary due to factors such as the type of paver (e.g., marble, cobblestone), the complexity of the design, site accessibility, and the experience level of the installation crew. For example, installing marble pavers can have labor costs around $7 per square foot, while more intricate designs or difficult terrains may incur higher labor rates.