Swivl

How Much Does Edging Of Drive & Street Cost in ?

$8 – $33 per linear ft

Homeowners in Sharpsburg, GA, typically pay between $8 and $33 per linear foot for driveway and street edging. The cost can vary based on the type of material chosen and the complexity of the design.

Edging of drive & street cost by tier

What most Sharpsburg homeowners pay at each tier.

Basic

$3.50 – $8.80per linear ft

Simple concrete curbing or basic plastic edging installations.

Mid-range

$9 – $28per linear ft

Standard concrete curbing or steel edging with some customization.

Premium

$20 – $60per linear ft

Stamped or colored concrete, brick/stone edging, or complex patterns requiring significant prep work.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what edging of drive & street typically costs in Sharpsburg, GA. The page shows a range of $4–$60 per linear ft, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

When enhancing your home's curb appeal in Sharpsburg, GA, the details matter. Driveway and street edging not only defines your landscape but can also improve functionality and property value. For homeowners considering this upgrade, understanding the potential costs is crucial for effective budgeting and decision-making. Most homeowners in Sharpsburg, GA, can expect to pay $8 to $33 per linear foot for professional edging services. This typical range covers a variety of materials and designs that can elevate your home's exterior.

While the typical cost falls within this range, the overall investment can vary significantly based on material choices, design complexity, and the specific contractor you choose. The full spectrum of pricing for driveway and street edging in Sharpsburg, GA, can span from $3.50 to $60 per linear foot. This broader range accounts for everything from the most basic plastic edging to intricate custom designs using premium materials like natural stone or stamped concrete. By understanding these cost variations, you can better compare quotes and ensure your project aligns with your vision and budget.

Cost Comparison

TierPrice RangeWhat's Included
Basic$3.50–$8.80 per linear ftSimple concrete curbing or basic plastic edging installations.
Mid-range$9–$28 per linear ftStandard concrete curbing or steel edging with some customization.
Premium$20–$60 per linear ftStamped or colored concrete, brick/stone edging, or complex patterns requiring significant prep work.

Labor Costs

Professional installation of drive and street edging involves various tasks that contribute to the overall labor cost. These can include:

TaskDescription
Site PreparationClearing the area, minor grading, and trenching for the edging material.
Material InstallationLaying and securing the chosen edging material, whether it's concrete, plastic, steel, or stone.
Finishing TouchesCleaning up the work area, applying sealants, and ensuring a neat, professional look.
Custom WorkFor premium options, this includes specialized techniques like stamping, coloring, or intricate pattern work.

Key Cost Factors

  • Material Selection: The type of material chosen for your edging is often the biggest cost driver. Plastic, steel, concrete, and brick/stone all have different price points.
  • Design Complexity: Simple straight runs are less expensive than elaborate curves, intricate patterns, or multi-tiered designs that require more skill and time.
  • Amount of Edging: While the per-linear-foot cost is standard, some contractors may offer a slightly lower per-foot rate for larger projects (e.g., above 120 linear feet) due to economies of scale.
  • Site Accessibility and Preparation: Projects on sloped terrain or those requiring significant ground preparation, such as extensive excavation or grading, can increase labor costs.
  • Geographical Location: While this guide focuses on Sharpsburg, GA, local market demand and contractor availability can influence pricing compared to other regions like Newnan or Lilburn.

Regional Pricing

While this guide is specifically for Sharpsburg, GA, comparing costs in nearby areas can offer a broader perspective.

LocationTypical Price Range per Linear Foot
Sharpsburg, GA$8–$33
Newnan, GA$9–$28
Lilburn, GA$8–$28

Tips for Hiring

  1. Get Multiple Quotes: Always solicit quotes from at least three different contractors to compare pricing, services, and timelines. This helps ensure you're getting a fair market rate.
  2. Check References and Portfolios: Ask for examples of their previous work or contact past clients. This can give you insight into their quality of work and customer service.
  3. Understand the Scope of Work: Ensure the quote explicitly details all aspects of the project, including site preparation, materials, installation, and cleanup, to avoid hidden costs.
  4. Confirm Licensing and Insurance: Verify that the contractor is properly licensed and insured in Georgia. This protects you from liability in case of accidents or damage during the project.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 1 edging of drive & street pros in Sharpsburg, GA.

1 of 1 verified pros

See all 1 pros

Find Edging Of Drive & Street Contractors in Sharpsburg, GA

Get free quotes from top-rated local contractors

FAQs

Common questions about edging of drive & street costs in Sharpsburg, GA.

To determine the amount of edging required, simply measure the total length in linear feet of all the areas you wish to border. This measurement will help you calculate material quantities and get accurate quotes from contractors.

Common materials include pre-formed concrete curbing, poured concrete (which can be custom stamped or colored), steel, plastic, and natural options like brick or stone. Each material offers different aesthetics, durability, and price points.

Yes, it can. While there's a standard per-linear-foot cost, some contractors may offer a slightly reduced rate for longer projects, especially once they exceed a certain length, such as 120 feet, as it becomes more cost-effective for them.

DIY can save on labor costs for basic edging types, but professional installation ensures proper grading, drainage, and a durable, aesthetically pleasing finish. For complex designs or permanent materials like concrete, professional help is often recommended to avoid costly mistakes.

The lifespan of your edging depends heavily on the material and installation quality. Plastic edging might last 5-10 years, while well-installed concrete, steel, brick, or stone edging can last 20 years or more with proper maintenance.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide