Cold Formed Metal Framing / Metal Studs
Loading...
Loading...
Cold formed metal framing, or metal studs, typically cost between $1.27 and $1.87 per linear foot. The specific gauge and size of the studs are the primary drivers of this cost.
Contractor? Create instant estimates with AI and win more jobs.
Try Now for free!What most Duluth customers get at each price point.
Includes 18-gauge 400S162-43 or 400T200-43 studs/track.
Includes 18-gauge 600S162-43 or 600T200-43 studs/track, or 14-gauge 4-inch studs/track.
Includes 18-gauge 800S162-43 studs/track or 14-gauge 6-inch studs/track.
Click any value to edit, All fields are fully customisable
$2,063.68
Total Estimate Amount
MAX can make mistakes.
This is a Preliminary Estimate
This estimator provides a starting point based on typical jobs. Actual costs may vary based on site conditions, material availability, permit requirements, and other factors discovered during work. We recommend a site visit before providing final pricing to customers.
This estimate is based on typical job parameters. Review and adjust for your specific situation. Standard market rates for your region, mid-grade materials unless specified, standard business hours labor rates, typical job complexity without major complications, basic cleanup included in labor time.
Job complexity
Simple repairs cost less than full installations or replacements. Multi-step jobs requiring permits or inspections add to the total.
Material quality
Budget, mid-grade, and premium materials can swing the price significantly. Discuss options with your contractor to find the right balance.
Local labor rates
Labor costs vary by region, season, and demand. Urban areas and peak seasons typically have higher rates than rural or off-peak times.
Site conditions
Difficult access, older structures, code upgrades, or unexpected issues discovered during work can increase the final cost.
Every contractor prices differently. Create a free account to set custom labor rates, material markups, and default margins that match your business.
Compare local pros and get free quotes
Common questions about costs and estimates for this service.
The average cost of metal stud framing, including both labor and materials, is between $7 and $14 per square foot. This generally breaks down to $5 to $10 per square foot for labor and $2 to $4 per square foot for materials.
For panelized cold-formed steel framing, the material cost typically ranges from $12 to $15 per square foot for manufactured wall panels. On-site assembly adds approximately $4 to $6 per square foot.
To estimate, first measure the perimeter of the room or area to determine the linear feet needed. Next, consider the stud spacing (e.g., 16 or 24 inches on center). Finally, it's advisable to add an extra stud to your calculation to account for potential cuts or waste.
For 1,000 square feet, the cost to frame with metal studs typically ranges from $7,000 to $16,000, including both labor and materials.
The primary factors influencing the cost per linear foot are the gauge of the steel (e.g., 18-gauge vs. 14-gauge) and the dimensions of the stud or track (e.g., 4-inch vs. 6-inch). Heavier gauges and larger sizes will result in higher costs per linear foot.