Fencing Staining
Loading...
Loading...
Most homeowners in Pooler, GA can expect to pay between $1.33 and $2.68 per square foot to have their fence stained. The total cost is primarily influenced by the fence's size and complexity, as well as the type of stain used.
Contractor? Create instant estimates with AI and win more jobs.
Try Now for free!What most Pooler customers get at each price point.
This includes washing and staining a bare, simple fence with standard stain.
This covers typical fence staining projects with common materials and labor, potentially including some preparation.
This might include more complex fence designs or higher-quality stain products and extensive preparation.
Click any value to edit, All fields are fully customisable
$2,063.68
Total Estimate Amount
MAX can make mistakes.
This is a Preliminary Estimate
This estimator provides a starting point based on typical jobs. Actual costs may vary based on site conditions, material availability, permit requirements, and other factors discovered during work. We recommend a site visit before providing final pricing to customers.
This estimate is based on typical job parameters. Review and adjust for your specific situation. Standard market rates for your region, mid-grade materials unless specified, standard business hours labor rates, typical job complexity without major complications, basic cleanup included in labor time.
Job complexity
Simple repairs cost less than full installations or replacements. Multi-step jobs requiring permits or inspections add to the total.
Material quality
Budget, mid-grade, and premium materials can swing the price significantly. Discuss options with your contractor to find the right balance.
Local labor rates
Labor costs vary by region, season, and demand. Urban areas and peak seasons typically have higher rates than rural or off-peak times.
Site conditions
Difficult access, older structures, code upgrades, or unexpected issues discovered during work can increase the final cost.
Every contractor prices differently. Create a free account to set custom labor rates, material markups, and default margins that match your business.
Compare local pros and get free quotes
Common questions about costs and estimates for this service.
To calculate the square footage, measure the linear feet of the fence and multiply it by its average height. For example, a 100-foot-long fence that is 6 feet tall has 600 square feet of surface area to be stained on one side. If both sides need staining, double that figure.
Costs can exceed the typical range due to factors such as complex fence designs (e.g., intricate lattice), extensive preparation required for heavily weathered or previously stained fences, the use of high-end or specialized stain products, or difficult site accessibility which increases labor time.
For a small fence (up to 175 sq ft), one gallon of stain is usually sufficient. For larger fences (up to 550 sq ft), two gallons may be needed. Very large projects (up to 700 sq ft) could require three to four gallons, depending on the fence's porosity and the number of coats.
Absolutely. Proper surface preparation, including pressure washing to remove dirt, mildew, and old, loose stain, is critical for the new stain to adhere correctly and last longer. It should be a standard component of most professional staining quotes, typically covered within the 'Basic' or 'Mid-range' tier's preparation scope.
Assuming a standard 6-foot tall privacy fence, 230 linear feet translates to 1380 square feet (230 ft * 6 ft). At the typical Pooler, GA rate of $1.33 to $2.68 per square foot, the cost would range from approximately $1,835 to $3,698 for one side. If both sides are stained, the square footage doubles, and the cost would be proportionally higher, likely falling into the higher end or premium tier due to the larger scope.