Swivl

How Much Does Heating System Installation Cost in ?

$6k – $18.5k per job

Most homeowners in Marietta, GA, can expect to pay between $6,000 and $18,500 for heating system installation. The primary cost drivers are the type of system chosen (e.g., furnace vs. central heating) and the extent of the installation, such as whether new ductwork is required.

Heating system installation cost by tier

What most Marietta homeowners pay at each tier.

Basic

$1.9k – $4.5kper job

Basic furnace installation or replacement. This typically covers simpler jobs where existing infrastructure is used.

Mid-range

$5.8k – $8kper job

Installation of a new central heating system, often without extensive ductwork renovation, or a basic central AC unit installation.

Premium

$7k – $25kper job

Full HVAC system replacement, including both heating and cooling, or more complex central AC installations which may involve significant labor and high-efficiency units.

Get a personalized cost range for your job

Tell Max a little about your project and we'll narrow the range above to fit your specifics — then connect you with verified local contractors.

Estimator LogoMAX Logo
Personalize your estimate
Hey — I can help narrow down what heating system installation typically costs in Marietta, GA. The page shows a range of $1,900–$25,000 per job, but your specific job is probably in a tighter band. Tell me a little about what you're planning and I'll dial it in for you.

Estimates are a starting point — a real quote requires a site visit.

Introduction

Heating system installation in Marietta, GA, is a significant home improvement that can vary widely in cost. For most homeowners, the typical expense for this project falls between $6,000 and $18,500 per job. This range generally covers the common scenarios homeowners face when needing a new or replacement heating system.

However, the full spectrum of costs for heating system installation, including more specialized or extensive projects, can range from $1,900 to $25,000 per job. These variations depend on a multitude of factors, such as the type of system, the complexity of the installation, necessary ductwork modifications, and the chosen equipment's energy efficiency. Understanding these cost drivers can help homeowners in Marietta make informed decisions when comparing quotes.

Cost Comparison

TierPrice RangeWhat's Included
Basic$1,900–$4,500 per jobBasic furnace installation or replacement. Typically covers simpler jobs where existing infrastructure is used.
Mid-range$5,795–$8,000 per jobInstallation of a new central heating system, often without extensive ductwork renovation, or a basic central AC unit installation.
Premium$7,000–$25,000 per jobFull HVAC system replacement, including both heating and cooling, or more complex central AC installations which may involve significant labor and high-efficiency units.

Labor Costs

Service TypeAverage Labor CostNotes
Standard Furnace InstallationVariesIncluded within the overall project cost; depends on complexity and duration.
Central Heating System InstallationVariesCan involve significant labor, especially if ductwork needs to be installed or renovated.
Full HVAC System ReplacementVariesDue to the scope, labor costs for removing old units and installing new, potentially complex systems, will be higher.
Emergency or After-Hours ServiceHigher Hourly RatePremium rates apply for urgent or off-schedule installations/repairs.
Permits and InspectionsVariesLocal Marietta permitting and inspection fees are typically separate from installation labor.

Key Cost Factors

  • System Type and Efficiency: High-efficiency furnaces or advanced HVAC systems, while costing more upfront, can lead to significant energy savings over their lifespan. Gas central heating systems might range from $6,000 to $8,000 if good ductwork exists.
  • Ductwork Condition and Renovation: If your existing ductwork is old, damaged, or nonexistent, the cost will increase due to the need for repair, replacement, or new installation. Projects involving renovating ductwork can significantly impact the overall cost.
  • Home Size and Layout: Larger homes require more powerful systems and potentially more extensive ductwork, driving up material and labor costs. A 2,000 sq ft house will have different heating needs than a smaller or larger residence.
  • Brand and Features: Premium brands or systems with advanced features like smart thermostats, zoning capabilities, or specialized air purification can increase the total investment.
  • Accessibility of Installation Area: Confined spaces, attics, or crawl spaces can make installation more difficult and time-consuming, potentially increasing labor charges.

Regional Pricing

LocationTypical HVAC Replacement CostNotes
Marietta, GA$6,000–$18,500This range represents the typical costs for heating system installations in the Marietta area.
Atlanta, GA (General)$6,000–$15,000Heating and cooling system replacements in the broader Atlanta area generally fall within this range depending on system type and installation parameters.
Atlanta, GA (AC Units)$5,795–$25,000Central AC unit costs in Atlanta can vary significantly, often overlapping with full HVAC system pricing.
Evans, GA$4,300–$14,400HVAC system replacement costs in Evans, GA, which may differ slightly due to local market conditions.

Tips for Hiring

  1. Obtain Multiple Quotes: Always get at least three detailed quotes from different licensed and insured contractors in Marietta to compare pricing, services, and equipment. For example, Home Depot has completed many HVAC projects in the area, offering a strong reference point.
  2. Check Credentials and References: Verify that contractors are properly licensed and insured. Ask for references and check online reviews on platforms like Thumbtack or HomeAdvisor to gauge their reputation and customer satisfaction.
  3. Understand the Scope of Work: Ensure each quote clearly outlines what is included, such as labor, equipment, removal of old units, ductwork modifications, and warranty information. Clarify any additional costs like permits.
  4. Inquire About Warranties and Guarantees: A reputable installer should offer warranties on both the equipment and their workmanship. Understand the terms and duration of these guarantees before making a decision.

Ready to hire? Browse verified pros near you

See ratings, response times and starting prices for 2 heating system installation pros in Marietta, GA.

2 of 2 verified pros

See all 2 pros

Find Heating System Installation Contractors in Marietta, GA

Get free quotes from top-rated local contractors

FAQs

Common questions about heating system installation costs in Marietta, GA.

The $5,000 rule is a guideline to help homeowners decide whether to repair or replace their HVAC system. You multiply the age of your unit by the cost of the needed repair. If that number exceeds $5,000, replacing your HVAC system is often more cost-effective.

The cost of an HVAC system for a 2000 sq ft house can vary significantly based on the type of system (furnace, central AC, heat pump), its efficiency rating, and the complexity of installation. While there's no single price, it would typically fall within the mid-range to premium tiers, likely needing a system with adequate capacity for that square footage.

In Georgia, the cost to replace an HVAC system, including installation, typically ranges from $4,300 to $18,500. This range can vary depending on the specific city (e.g., Marietta or Evans), the type of system, and its energy efficiency ratings.

For allergy sufferers, HVAC systems that incorporate advanced air purification can be beneficial. UV air purifiers use ultraviolet light to kill bacteria, mold spores, and viruses, while electronic air cleaners use electrostatic charges to trap dust, pollen, and other allergens, preventing their circulation.

Yes, if you have good, pre-existing ductwork, it can significantly reduce the cost of installing a new central heating system. Without the need for extensive ductwork renovation or new installation, the project becomes simpler and less labor-intensive, often falling into the lower end of the mid-range cost tier.

Are you a contractor?

See job pricing and cost estimators built for field service professionals.

Contractor Cost Guide